omega-qr-code 微 信 公 众 号
咨询热线 400-820-0559

Programmable Step Motor Indexer/Drive

1240i

Programmable Step Motor Indexer/Drive | 1240i

Programmable Step Motor Indexer/Drive

查看下面所有型号

1年保修 CE
  • Provides Up to 1.2 A per Phase and Microstepping to 50,800 Steps Per Revolution
  • Accepts 12 to 42 Vdc Power Supply
  • Connects by a Simple Cable to Your PC for Programming (Cable Included)
  • Microsoft Windows™-Based Software for Easy Setup and Programming (Free Download)
  • 8 Inputs, 3 Outputs
  • Optional Man Machine Interface (MMI) Allows Operator to Enter Distances, Speeds, Cycle Counts and More
  • Compatible With Multi-Axis Controller HUB 444
  • CE Compliant
  • Sample Motion Programs Available by Request
驱动器和发动机 - 查看相关产品

产品描述

The 1240i is a stand-alone programmable step motor driver suited for a wide range of motion control applications. It includes a sophisticated controller integrated with a 48-watt microstepping amplifier. The 1240i includes easy to use software for the rapid development of stand-alone motion control programs. The 1240i can also be commanded in real time from a host PC or PLC, using the Si Command Language™ (SCL). SCL allows for control via serial commands sent from a host device such as a PC or PLC. This permits the user to perform a variety of motion, I/O, and system status tasks in real time via a host serial device.

For multi-axis applications, up to four drives (stepper or Servo) can be networked using a single SiNet™ Hub 444. The 1240i includes 8 optically isolated programmable inputs for triggering, branching, position sensing and end of travel detection. 3 optically isolated programmable outputs can send signals to other electronic devices and activate relays.

Si Programmer
Intended for use in stand-alone applications, Si (Simple Indexer) Programmer provides quick, out-of-the-box use with an extremely friendly, point-and-click graphical interface that does not require any software programming experience. Once an Si program has been constructed and downloaded to the drive, the program can be executed stand-alone at power-up or from an external trigger. Constructing a program is accomplished through the use of instructions selected in a point-and-click manner. Once an instruction is selected, a "fill in the blanks" format is used to input parameters.

Constructing an Si program requires no prior programming experience nor does it require learning a programming language. Si Programmer generates the actual motion control program, based on user selected parameters, thereby eliminating syntax errors. Once created, programs are easily downloaded, uploaded, saved and printed.

Si Programmer also provides the capability to control digital inputs and outputs, useful for interfacing with external equipment like PLCs, sensors, end-of-travel switches, and more. Si Programmer has found success in all types of applications, from simple linear actuator applications to complete machine control with operator interface applications.
订购 所有价格均为人民币税前价格,不包括13%增值税和运费!(指定型号)
网上下单立享5%折扣!

其他客户同时购买: 这个图标可以点击扩大,跳出的清单包括了其他客户在购买此产品时同时购买的其它产品。

产品编号产品描述
数量
产品描述
Quick Ship
Click to expand/minimize a list of what others bought with the1240i
1240i
咨询  
货期: 
 
 
Programmable step motor indexer drive
Recommended Motors
Quick Ship
  
OMHT11-013
¥1,453.52
货期: 7 周
 
NEMA 11 step motor, 15 oz-in holding torque
Quick Ship
  
OM5014-842
咨询  
货期: 
 
 
NEMA 14 step motor, 26 oz-in holding torque
Quick Ship
  
OMHT17-075
¥984.27
货期: 12 周
 
NEMA 17 step motor, 62.8 oz-in holding torque
Quick Ship
  
OMHT17-275
¥723.90
货期: 6 周
 
NEMA 17 step motor, 62.3 oz-in holding torque
Quick Ship
  
OMHT17-278
¥856.09
货期: 4 周
 
NEMA 17 step motor, 113 oz-in holding torque, 1.0 A/phase (series connection)
Quick Ship
  
OMHT23-393
咨询  
货期: 
 
 
NEMA 23 step motor, 76.6 oz-in holding torque
Quick Ship
  
OMHT23-593
¥856.09
货期: 6 周
 
NEMA 23 step motor, 79.3 oz-in holding torque
Accessories
Quick Ship
  
MMI-01
咨询  
货期: 
 
 
Operator Interface
Quick Ship
  
HUB 444 DIN RAIL
咨询  
货期: 
 
 
Multi-axis network hub with DIN rail mounting kit
Quick Ship
Click to expand/minimize a list of what others bought with theOM-CONV-USB
OM-CONV-USB
¥214.02
货期: 库存
 
USB to RS232 Interface Converter; USB-A to DB9-male
Quick Ship
Click to expand/minimize a list of what others bought with theOMPS150A24
OMPS150A24
咨询  
货期: 
 
 
Stepper drive power supply, 24 VDC, 6.3A
Quick Ship
  
Power Cord-SE
¥108.31
货期: 5 周
 
AC Power cord with stripped end termination
Quick Ship
  
SI-PROG-CBL
¥263.13
货期: 4 周
 
Replacement programming cable (comes with drive)
Quick Ship
  
DRIVE-CBL
咨询  
货期: 
 
 
Replacement MMI and/or HUB communications cable (comes with MMI-01 and HUB 444)
Quick Ship
  
DSUB-9-MF
咨询  
货期: 
 
 
DIN rail interface module, 9-pin
Quick Ship
  
DSUB-9-MF-CBL
¥404.13
货期: 2 周
 
DSUB cable, 9-pin, 2 m (6.6'), male/female connectors
所有金额以RMB显示
注: Programming cable included. Software is a free download; click on "Software" icon below the picture. To see torque-speed curves for recommended motors, click on "Specs" above.
订购示例:  (1) OMHT17-075 NEMA 17 step motor, 62.8 oz-in holding torque, ¥984.27 

产品手册:

下载 1240i Series - Programmable Step Motor Driver
下载 STM, ST, Stac6, 1240i, 3540i, si3540 Series - Si Command Language (SCL) for Stepper Drives
400-820-0559