Microstepping Motor Drives

3540M

查看下面所有型号

下单

DC Bus Voltage 12 to 40 Vdc Motor Supply
Switch Selectable Motor Currents from 0.4 to 3.5 A/Phase
Optically Isolated 5 Vdc Inputs for Step, Direction and Enable
Enable Input to Turn Off Current to the Motor
Screw Terminal Connectors
MOSFET, Dual H-Bridge, Inaudible PWM Amplifier
Pulse Width Modulated Current Control

驱动器和发动机 - 查看相关产品

产品描述

The 3540M/MO step motor drivers are microstepping drives with up to 12,800 steps per revolution, with MOSFET three state switching amplifiers and optoisolated circuits. Both drives include 5 optically isolated inputs, and the 3540MO features external speed control, tach output, and internal pots for accel/decel rate along with high/low speed range selection.

The 3540M drive is a step and direction drive, and includes an automatic feature (switch selectable) to lower motor current by 50% anytime the motor is left at rest for more than one second. Additionally there is a switch-selectable self-test which rotates the motor 1/2 revolution in each direction at 100 steps/second. This drive is compatible with PLCs which feature high-speed pulse output, such as our ELC-PLC series and OCS XL series.
Note: the Step, Direction, and Enable inputs are +5V-logic compatible. For operation with +24V signals, a 3600-ohm series resistor is required on each input. See the drive manual for details.

The 3540MO drive has an on-board oscillator which allows the motor speed to be controlled by an analog voltage or external joystick. This drive is ideal for continuous motion applications such as mixers and blenders. A tach output is also available on this drive.

Motor current for both drives is selected from 32 levels by a DIP switch. Microstepping resolution is selectable by DIP switch on the 3540M. On the 3540MO, microstepping resolution is fixed at 12,800 steps/revolution.

Learn more about stepper motors and drives: Introduction to Stepper Motors and Drives

Click here for more info on the ELC series PLC: ELC-PLC Series

Click here for more info on the OCS XL series PLC: OCS XL Series

Power Supply (Required for Drive Operation): Recommended: OMPS150A24

订购所有价格均为人民币税前价格，不包括13%增值税和运费！(指定型号)

其他客户同时购买: 这个图标可以点击扩大，跳出的清单包括了其他客户在购买此产品时同时购买的其它产品。

产品编号产品描述

数量

产品描述

3540M

咨询

货期:

Microstepping step motor drive, 3.5 A/phase, 40 VDC

3540MO

咨询

货期:

Microstepping step motor drive with digital oscillator

Recommended Motors

OMHT17-075

¥984.27

货期: 12 周

NEMA 17, 62.8 oz-in holding torque

OMHT17-275

¥723.90

货期: 6 周

NEMA 17, 62.3 oz-in holding torque

OMHT17-278

¥856.09

货期: 4 周

NEMA 17, 113 oz-in holding torque

OMHT23-393

咨询

货期:

NEMA 23, 76.6 oz-in holding torque

OMHT23-593

¥856.09

货期: 6 周

NEMA 23, 79.3 oz-in holding torque

OMHT24-100

¥961.38

货期: 6 周

NEMA 24, 123 oz-in holding torque

OMHT23-397

咨询

货期:

NEMA 23, 177 oz-in holding torque

OMHT23-597

¥950.51

货期: 10 周

NEMA 23, 177 oz-in holding torque

OMHT23-400

咨询

货期:

NEMA 23, 264 oz-in holding torque

OMHT23-600

¥1,402.01

货期: 2 周

NEMA 23, 264.8 oz-in holding torque

Accessories

OMPS150A24

咨询

货期:

Stepper drive power supply, 24 VDC, 6.3A

Power Cord-SE

¥108.31

货期: 5 周

AC Power cord with stripped end termination

† 所有金额以RMB显示
注: To see torque-speed curves for recommended motors, click on "Specs" above.
订购示例: (1) OMHT23-597 NEMA 23 stepper motor, 177oz-in holding torque, ¥950.51

产品手册:

下载 3540M - Step Motor Driver

下载 3540MO Series - Step Motor Driver