Programmable Step Motor Indexer/Drive

3540i

^¥5,774.00 3540i

下单

Provides Up to 3.5 A per Phase and Microstepping to 50,800 Steps per Revolution
Accepts 12 to 42 Vdc Power Supply
Connects by a Simple Cable to Your PC for Programming (Cable Included)
Microsoft Windows™-Based Software for Easy Set up and Programming
8 Inputs, 3 Outputs
Optional Man Machine Interface (MMI) Allows Operator to Enter Distances, Speeds, Loop Counts and More
Compatible With Multi-Axis Controller HUB 444
Optional encoder + RS485 daughterboard
Sample Motion Programs Available by Request

驱动器和发动机 - 查看相关产品

产品描述

The 3540i is a programmable step motor driver suitable for a wide range of motion control applications. It includes a sophisticated controller integrated with a 140 watt microstepping amplifier. The 3540i includes Applied Motion's easy to use Si Programmer™ Windows software for the rapid development of stand-alone motion control programs. The 3540i can also be commanded in real time from a host PC or PLC, using the Si Command Language™ (SCL). SCL allows for control via serial commands sent from a host device such as a PC or PLC. This permits the user to perform a variety of motion, I/O, and system status tasks in real time via a host serial device.

For multi-axis applications, up to 4 Applied Motion Si™ drives (stepper or Servo) can be networked using a single SiNet™ Hub. The 3540i includes 8 optically isolated programmable inputs for triggering, branching, position sensing and end of travel detection. 3 optically isolated programmable outputs can send signals to other electronic devices and activate relays. A daughterboard is available which provides an encoder input as well as an RS485 interface.

Si Programmer
Intended for use in stand-alone applications, Si (Simple Indexer) Programmer provides quick, out-of-the-box use with an extremely friendly, point-and-click graphical interface that does not require any software programming experience. Once an Si program has been constructed and downloaded to the drive, the program can be executed stand-alone at power-up or from an external trigger. Constructing a program is accomplished through the use of instructions selected in a point-and-click manner. Once an instruction is selected, a "fill in the blanks" format is used to input parameters.

Constructing an Si program requires no prior programming experience nor does it require learning a programming language. Si Programmer generates the actual motion control program, based on user selected parameters, thereby eliminating syntax errors. Once created, programs are easily downloaded, uploaded, saved and printed.

Si Programmer also provides the capability to control digital inputs and outputs, useful for interfacing with external equipment like PLCs, sensors, end-of-travel switches, and more. Si Programmer has found success in all types of applications, from simple linear actuator applications to complete machine control with operator interface applications.

订购所有价格均为人民币税前价格，不包括13%增值税和运费！(指定型号)

其他客户同时购买: 这个图标可以点击扩大，跳出的清单包括了其他客户在购买此产品时同时购买的其它产品。

产品编号产品描述

数量

产品描述

3540i

¥5,774.00

货期: 2 周

Programmable step motor index drive

Recommended Motors

OMHT17-075

¥984.27

货期: 12 周

NEMA 17, 62.8 oz-in holding torque

OMHT17-275

¥723.90

货期: 6 周

NEMA 17, 62.3 oz-in holding torque

OMHT17-278

¥856.09

货期: 4 周

NEMA 17, 113 oz-in holding torque

OMHT23-393

咨询

货期:

NEMA 23, 76.6 oz-in holding torque

OMHT23-593

¥856.09

货期: 6 周

NEMA 23, 79.3 oz-in holding torque

OMHT24-100

¥961.38

货期: 6 周

NEMA 24, 123 oz-in holding torque

OMHT23-397

咨询

货期:

NEMA 23, 177 oz-in holding torque

OMHT23-597

¥950.51

货期: 10 周

NEMA 23, 177 oz-in holding torque

OMHT23-400

咨询

货期:

NEMA 23, 264 oz-in holding torque

OMHT23-600

¥1,402.01

货期: 2 周

NEMA 23, 264.8 oz-in holding torque

Double Shaft Motors (required for encoder mounting)

OMHT17-075-D

¥1,064.39

货期: 18 周

NEMA 17, 62.8 oz-in holding torque, double shaft

OMHT17-275-D

¥793.14

货期: 6 周

NEMA 17, 62.3 oz-in holding torque, double shaft

OMHT23-393-D

咨询

货期:

NEMA 23, 76.6 oz-in holding torque, double shaft

OMHT23-593-D

¥925.33

货期: 6 周

NEMA 23, 79.3 oz-in holding torque, double shaft

OMHT24-100-D

¥1,035.77

货期: 6 周

NEMA 24, 123 oz-in holding torque, double shaft

OMHT23-397-D

咨询

货期:

NEMA 23, 177 oz-in holding torque, double shaft

OMHT23-597-D

¥927.05

货期: 2 周

NEMA 23, 177 oz-in holding torque, double shaft

OMHT23-400-D

咨询

货期:

NEMA 23, 264 oz-in holding torque, double shaft

OMHT23-600-D

¥1,464.96

货期: 6 周

NEMA 23, 264.8 oz-in holding torque, double shaft

Accessories

ENC-1000-175

咨询

货期:

Accessory daughterboard for Encoder inputs + RS485 comm

ENC-1000i

咨询

货期:

Differential encoder for NEMA 11/14/17 motors, 1000-line, with index pulse

ENC-1000i-23

咨询

货期:

Differential encoder for NEMA 23/24 motors, 1000-line, with index pulse

ENC-CA-4217-6FT

咨询

货期:

Encoder cable, 2 m (6')

ENC-CA-4217-10FT

咨询

货期:

Encoder cable, 3 m (10')

ENC-CA-4217-20FT

咨询

货期:

Encoder cable, 6 m (20')

MMI-01

咨询

货期:

Operator Interface

HUB 444 DIN RAIL

咨询

货期:

Multi-axis network hub with DIN rail mounting kit

OM-CONV-USB

¥214.02

货期: 库存

USB to RS232 Interface Converter; USB-A to DB9-male

OMPS150A24

咨询

货期:

Stepper drive power supply, 24 VDC, 6.3A

Power Cord-SE

¥108.31

货期: 5 周

AC Power cord with stripped end termination

SI-PROG-CBL

¥263.13

货期: 4 周

Replacement programming cable (comes with drive)

DRIVE-CBL

咨询

货期:

Replacement MMI and/or HUB communications cable (comes with MMI-01 and HUB 444)

DSUB-9-MF

咨询

货期:

DIN rail interface module, 9-pin

DSUB-25-MF

咨询

货期:

DIN rail interface module, 25-pin

DSUB-9-MF-CBL

¥404.13

货期: 2 周

DSUB cable, 9-pin, 2 m (6.6'), male/female connectors

DSUB-25-MF-CBL

¥545.00

货期: 2 周

DSUB cable, 25-pin, 2 m (6.6'), male/female connectors

† 所有金额以RMB显示
注: Programming cable included. Software is a free download; click on "Software" icon below the picture. To see torque-speed curves for recommended motors, click on "Specs" above.
订购示例: (1) 3540I Programmable step motor indexer/drive, ¥5,774.00 plus (1) OM-CONV-USB USB to RS-232 Interface Converter, ¥214.02 plus (1) OMHT17-075 NEMA 17 stepper motor, 62.8oz-in holding torque, ¥984.27 , ¥5,774.00 + 214.02 + 984.27 = ¥6,972.29

产品手册:

下载 3540i Series - Programmable Step Motor Driver

下载 STM, ST, Stac6, 1240i, 3540i, si3540 Series - Si Command Language (SCL) for Stepper Drives