低轮廓工业级加速度计

ACC787A

Industrial Low Profile Accelerometer

^¥2,946.88 ACC787A

下单

Corrosion Resistant
Reverse Wiring Protection
Rugged Industrial Design
Ground Isolated
ESD Protection

动态测量 - 查看相关产品

产品描述

The OMEGAROMETER Series accelerometers are one of the best accelerometers designed for industrial vibration measurements. These accelerometers feature a hermetically sealed 316L stainless steel case suitable for harsh environments. The ACC787A is a general purpose accelerometer with a low profile side cable exit.

SPECIFICATIONS
DYNAMIC
Sensitivity, ±10%, 25°C (77°F): 100 mV/g
Acceleration Range¹: 80 g peak
Amplitude Non-Linearity: 1%
Frequency Response:
   ±10%: 1.0 to 5000 Hz
   ±3 dB: 0.7 to 10,000 Hz
Resonance Frequency: 22 kHz
Transverse Sensitivity, Max: 5% of axial
ELECTRICAL
Power Requirement:
Voltage Source¹: 18 to 30 Vdc
Current Regulating Diode^1,2: 2 to 10 mA
Electrical Noise, Equiv. g Nominal:
Broadband: 2.5 Hz to 25 kHz: 700 µg
Spectral:
   10 Hz: 10 µg√Hz
   100 Hz: 5 µg√Hz
   1000 Hz: 5 µg√Hz
Output Impedance, Max: 100 Ω
Bias Output Voltage, Nominal: 12 Vdc
Grounding: Isolated case, internally shielded
ENVIRONMENTAL
Temperature Range: -50 to 120°C (-58 to 248°F)
Vibration Limit: 500 g peak
Shock Limit: 5000 g peak
Electromagnetic Sensitivity, Equiv. g, Max: 70 µg/gauss
Sealing: Hermetic to 10^-8 cc/s
Base Strain Sensitivity, Max: 0.002 g/microstrain
PHYSICAL
Weight: 145 g (5.1 oz)
Case Material: 316L SS
Mounting: ¼-28 captive hex head screw with 1.2 mm (0.046") diameter safety wire hole
Connector: 2 pin, MIL-C-5015 style
Connections:
   Pin A: Power/signal
   Pin B: Common
Mating Connector: Amphenol 97-3106A-10SL-4S type
Recommended Cabling: ACC-CB7-10

NOTES:
1 To minimize signal distortion when driving long cables or high-vibration signals, 24 to 30 Vdc powering is recommended. The higher-level constant current source should be used when driving long cables.
2 A maximum current of 6 mA is recommended for operating temperatures above 100°C (212°F).

订购所有价格均为人民币税前价格，不包括13%增值税和运费！(指定型号)

其他客户同时购买: 这个图标可以点击扩大，跳出的清单包括了其他客户在购买此产品时同时购买的其它产品。

产品编号产品描述

数量

产品描述

ACC787A

¥2,946.88

货期: 2 周

General purpose accelerometer with side exit connector

Accessories

ACC-CB7-10

¥1,455.02

货期: 6 周

3.05 m (10') MIL/BNC twisted pair shielded cable

ACC-CB7-10WP

¥2,345.23

货期: 11 周

3.05 m (10') waterproof twisted pair shielded cable

ACC-B3

咨询

货期:

Magnetic mounting base for flat surfaces, 30 lb force

ACC-B5

咨询

货期:

Magnetic mounting base for curved surfaces, 30 lb force

ACC-PS3-230VAC

咨询

货期:

230 VAC powered power supply

† 所有金额以RMB显示
注: ACC787A includes captive mounting screw and calibration data. Specify cable separately, see Accessories. ACC787A + ACC-CB7-10 + ACC-B3 + ACC-PS2, is a typical accelerometer system.
订购示例: (1) ACC-CB7-10 Cable, ¥1,455.02 plus (1) ACC787A Accelerometer, ¥2,946.88, ¥1,455.02 + 2,946.88 = ¥4,401.90