洁净水、水溶液循环加热器

CHF9 Series

Circulation Heaters

查看下面所有型号

下单

Standard Element Sheath Materials
Incoloy® 800 — A Nickel (30 to 35%), Chromium (19 to 23%), Iron alloy. The high nickel content of this alloy contributes to its resistance to scaling and corrosion. Used in air heating (also see Incoloy® 840) and immersion heating of potable water and other liquids that are not corrosive to an Incoloy® 800 sheath.
Low Carbon Steel — Applications include fluid heat transfer media, tar, high to low viscosity petroleum oils, asphalt, wax, molten salt, and other solutions not corrosive to a steel sheath.
316 Stainless Steel — A Chromium (16 to 18%), Nickel (11 to 14%), Iron Alloy with Molybdenum (2 to 3%) added to improve corrosion resistance in certain environments, especially those that would tend to cause pitting due to the presence of chlorides. Applications include deionized water.
Copper — Mainly used in clean water heating for washrooms, showers, rinse tanks and freeze protection of storage tanks.

产品描述

Surface Treatments for Stainless Steel and Incoloy® Elements and Other Wetted Parts to Improve Corrosion Resistance Flanged immersion heater surfaces in contact with the material being heated can be passivated or electro-polished to improve their resistance to corrosion. Passivation removes surface contamination, usually iron, so that the optimum corrosion resistance of the stainless steel is maintained. Surface contamination would come from the small amount of steel that may be worn off a tool during the manufacturing process. Passivating is accomplished by dipping the heater in a warm solution of nitric acid. Electro-Polishing is an electrochemical process that removes surface imperfections and contaminants, enhancing the corrosion resisting ability of the stainless steels. The resultant surface is clean, smooth and bright. Many medical and food applications require this finish.

Nominal Pipe Size	Dimensional Drawing Number	KW	Model Number					Approx Weight
8 watts/in² (1.3 watts/cm²)—Typical Applications: Fuel Oils (Bunker C and Number 6) Note: 3-Phase only. Cannot be rewired for single phase.
Nominal Pipe Size	Dimensional Drawing Number	KW	120V	240V-1Ph (C*)	240V-3Ph (C*)	480V-1Ph (C*)	480V-3Ph (C*)	lb	kg
2½ NPT 3 elements	2.2	2	—	—	CHF01100 (1)	—	CHF01101 (1)	37	17
2½ NPT 3 elements	2.3	3	—	—	CHF01102 (1)	—	CHF01101 (1)	46	21
3"—150 lb 3 elements	3.2	2	—	—	CHF01104 (1)	—	CHF01105 (1)	62	28
3"—150 lb 3 elements	3.3	3	—	—	CHF01106 (1)	—	CHF01107 (1)	76	34
(C*) = Number of Branch Circuits per heater

Vessel Material	Model No. 120/240V	KW	“A” OAL		“B” Inlet/Outlet		Approx Weight
Typical Applications: Clean Water, Aqueous Solutions
Vessel Material	Model No. 120/240V	KW	inch	mm	inch	mm	lb	kg
Carbon Steel	CHF02097	1.5	18	457	12³⁄₈	314	8	3.6
	CHF02098	2.0	18	457	12³⁄₈	314	8	3.6
	CHF02099	2.5	22	559	16³⁄₈	416	11	5.0
	CHF02100	3.0	22	559	16³⁄₈	416	11	5.0
Bronze	CHF02101	1.5	18	457	12³⁄₈	314	12.5	5.7
	CHF02102	2.0	18	457	12³⁄₈	314	12.5	5.7
	CHF02103	2.5	22	559	16³⁄₈	416	14.5	6.6
	CHF02104	3.0	22	559	16³⁄₈	416	14.5	6.6
Ordering Example: CHF02098, 2 KW, 240 Vac circulation heater.

Vessel Material	Model No. 120/240V	KW	“A” OAL		“B” Inlet/Outlet		Approx Weight
Typical Applications: Lubricating Oils
Vessel Material	Model No. 120/240V	KW	inch	mm	inch	mm	lb	kg
Carbon Steel	CHF02105	0.5	22	559	16³⁄₈	416	11	5.0
	CHF02106	0.75	22	559	16³⁄₈	416	11	5.0
	CHF02107	1.0	22	559	16³⁄₈	416	11	5.0
Ordering Example: CHF02107, 1 KW, 120 Vac circulation heater.