1/4 & 1/8 DIN Limitl Temperature/Process Limit Controllers with Modular Outputs and Communications Discontinued Product

CN1622 & CN1612 Series

Temperature Limit Controllers

查看下面所有型号

下单

CN 1612 is 1/8 DIN & CN1622 is 1/4 DIN Limit Controller
Dual Four-Digit Red LED Display
Universal Sensor Input: Thermocouple, 3-Wire RTD or dc Linear (mA, mV or V)
Latching Limit Relay Output
Modular Outputs
90 to 264 Vac Power Supply is Standard
Simple Configuration with Password Protection
Factory Mutual Approved
UL Listed (C), (US)
NEMA-4 Type/IP65 Sealed Front Panel

OPTIONS
Low Voltage Power Supply: 20 to 50 Vac/22 to 65 Vdc
Configuration Software
Remote Reset
Analog Retransmission
Transducer Power Supply
Alarm Outputs
RS-485 Communications

产品描述

The CN1612 & Cn1622 Series is no longer available. Please review the CN8240 & CN8260 Series as potential substitutes or contact ourTemperature Engineering Department for other alterantives.

The CN1612 and CN1622 are a new line of limit controllers designed to provide a programmable safety cut out and optional alarm for use in a wide variety of applications with process controllers.

The CN1612 and CN1622 both provide a latched relay output which is activated when process parameters either exceed or fall below the desired value, providing a fail safe shutoff which has to be manually reset before the process can continue.

The instrument can be configured to be either a high limit unit where the relay will de-energize when the process variable is above the limit setpoint, or a low limit where the relay will drop out when the PV falls below the setpoint. LED indication shows when limits have been exceeded and when the relay is latched out. It offers a full range of universal sensor input options, versatile configuration and a front panel sealed to NEMA-4/IP65 standards.

The CN1612 and CN1622 both provide a valuable safety control element in most applications and systems.

For Special Options Consult Sales or Temperature Engineering for Availability and Pricing.

订购所有价格均为人民币税前价格，不包括13%增值税和运费！(指定型号)

产品编号产品描述

数量

产品描述

CN1622-R1-LV

咨询

货期:

1/4 DIN limit controller, single 5 amp relay output with 20 to 50 Vac/22 to 65 Vdc

BD1600-R

咨询

货期:

2 A relay output*

BD1600-F

咨询

货期:

Analog output*

BD1600-XP

咨询

货期:

24 Vdc Transmitter power supply*(use "-TPS2" or "-TPS3" when ordered already mounted in controller)

BD1600-C4

咨询

货期:

RS-485 communications

† 所有金额以RMB显示
注: The single output modules are standard. To order two or three outputs, specify output suffixes from the Output Options table.
Only one Transmitter Power Supply can be ordered per unit.
*BD1600 modules are for Outputs 2 and 3 only.

**For configuration only, not used with RS-485 communications.