OMEGABUS系列四通道传感器连接计算机接口模块

D5000 Series

^¥2,792.58 D5111

下单

Four Channel Analog Input
Complete Sensor to RS-485 or RS-232C Interface
ASCII Format Command/ Response Protocol
500 V RMS Analog Input Isolation
15-Bit Measurement Resolution
Continuous Self-Calibration; No Adjustments of any Kind
Programmable Digital Filter
Requires +10 V to 30 Vdc Unregulated Supply
Transient Suppression on RS-485 Communications Lines
Screw Terminal Plug Connectors Supplied

USB, RS232, RS485和Ethernet数据采集系统 - 查看相关产品

产品描述

The D5000 Four Channel Sensor to Computer Modules are a family of complete solutions designed for data acquisition systems based on personal computers and other processor-based equipment with standard serial I/O ports. The modules convert four analog input signals to engineering units and transmit in ASCII format to any host with standard RS-485 or RS-232C ports. These modules can measure temperature, voltage and current. The modules provide direct connection to a wide variety of sensors and perform all signal conditioning, scaling, linearization and conversion to engineering units.
The modules contain no pots or switches to be set. Features such as address, baud rate, parity, echo, etc. are selectable using simple commands over the communications port–without requiring access to the module. The selections are stored in nonvolatile EEPROM which maintains data even after power is removed.

The key to the D5000 series is that the modules are easy to use. You do not need engineering experience in complicated data acquisition hardware. With the D5000 series modules, anyone familiar with a personal computer can construct a data acquisition system. This modular approach to data acquisition is very flexible, easy to use and cost effective. The modules can be mixed and matched to fit your application. They can be placed remote from the host and from each other. You can string up to 30 modules on one set of wires by using RS-485 with repeaters.

All modules are supplied with screw-terminal plug connectors and captive mounting hardware. The connectors allow system expansion, reconfiguration or repair without disturbing field wiring.

THEORY OF OPERATION
D5000 modules are complete four-channel data acquisition systems. Each unit contains analog signal conditioning circuits optimized for a specific input type. The amplified sensor signals are converted to digital data with a microprocessor-controlled integrating A/D converter. Offset and gain errors in the analog circuitry are continuously monitored and corrected using microprocessor techniques. The D5000 converts the digital signal data into engineering units using look-up tables. The resultant data is stored in ASCII format in a memory buffer. The modules continuously convert data at the rate of 8 conversions per second and store the latest result in the buffer.

The host computer may request data by sending simple ASCII commands to the module.

DIGITAL FILTER
The D5000 options include a unique programmable single pole digital filter. The filter is used to smooth analog data in noisy environments. Separate time constants may be specified for small and large signal changes. Typically, a large time constant is specified for small signal changes to filter out noise and provide stable output readings. A smaller time constant may be chosen for large signal changes to provide fast response to such changes.

COMMUNICATIONS
The D5000 are designed to be easy to interface to all popular computers and terminals. All communications to and from the module are performed with printable ASCII The D5000 will instantly respond by communicating the ASCII buffer data back to the host.

USER OPTIONS
The D5000 offers a variety of userselectable options including choice of address, baud rate, parity, echo, etc. All options are selectable using simple commands over the communications port. All options are stored in a nonvolatile EEPROM which maintains data even after power is removed.

COMMUNICATIONS The D5000 are designed to be easy to interface to all popular computers and terminals. All communications to and from the module are performed with printable ASCII characters. This allows the information to be processed with string functions common to most high-level languages such as BASIC. For computers that support standard ports such as RS-232C, no special machine language software drivers are necessary for operation.

RS-232C is not designed to be used as a multiparty system; however, the module can be daisychained to allow many modules to be connected to a single communications port. In this network, any characters transmitted by the host are received by each module in the chain and passed on to the next module until the information is echoed back to the host. If a module is correctly addressed and receives a valid command, it transmits a response on the daisy chain network. The response will be rippled through any other modules in the chain until it reaches the host. RS-485 was developed for multidropped systems that can communicate at high data rates over long distances. For systems requiring many modules, high speed or long distances, RS-485 is recommended.

To Order (Specify Model Number)
RS-232C Output Model Number	RS-485 Output Model Number	Input
D5111	D5112	100 mV
D5121	D5122	1 V
D5131	D5132	5 V
D5141	D5142	10 V
D5151	D5152	100 V
D5251	D5252	4-20 mA
D5311	D5312	J (Iron-Constantan)
D5321	D5322	K (Chromel-Alumel)
D5331	D5332	T (Copper-Constantan)
D5341	D5342	E (Chromel-Constantan)
D5451	D5452	2252 Ohm Thermistor

COMMON SPECIFICATIONS
ANALOG
Channels: Four analog input
Maximum CMV: Input to output at 60 Hz: 500 V rms
Leakage: Input to output at 115 V rms, 60 Hz: <2µA rms
Resolution: 15-bit measurement
Conversion Speed: 8 conversions per second
Common Mode Rejection: 100 dB at 50/60 Hz
Calibration: Autozero, no adjustment pots.
DIGITAL
Microcomputer: 8-bit CMOS
Filtering: Small and large signal digital filtering with user selectable time constants
COMMUNICATIONS
Baud Rates: 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200
Data Format: NRZ asynchronous; 1 start bit, 7 data bits, 1 parity bit and 1 stop bit
Parity: Odd, even, none
Address: User selectable address
Protocol: ASCII format
Multidrop Modules: Up to 30 per host serial port
Communications: Distance up to 4,000 feet (RS-485)
Transient Suppression: On RS-485 communication lines
Communications Error: Checking via checksum
Communications Setups: Stored in EEPROM
POWER REQUIREMENTS
Unregulated: +10 V to +30 Vdc, 0.75W max. Protected against power supply reversals.
ENVIRONMENTAL
Temperature Range: Operating: -25 to +70°C
Storage: -25 to +85°C
Relative Humidity:
0 to 95% non-condensing

D5100 VOLTAGE INPUTS
Input Ranges: ±100 mV, ±1 V, ±5 V, ±10 V, ±100 Vdc
Resolution: 0.01% of FS (4 digits)
Accuracy: ±0.02% of FS max
Zero Drift: ±1 count max (autozero)
Span Tempco: ±50ppm/°C max
Input Burnout Protection: To 250 Vac. Input Impedance:
+1 V input = 100 M. min
+5 V input = 1 M. min
D5200 CURRENT INPUT
Current: 4-20 mAdc
Resolution: 0.04% of FS
Accuracy: 0.04% of FS
Zero Drift: ±1count max (autozero)
Span Tempco: ±50ppm/°C max
Voltage Drop: ±1.0V max
D5300 THERMOCOUPLE INPUTS
Thermocouple Types: J, K, T, E (factory set)
Ranges:
J= -200 to 760°C, K= -150 to 1250°C
T= -200 to 400°C E= -100 to 1000°C
Resolution: ±1°
Overall Accuracy: (error from all sources) from 0 to 40°C Ambient: ±1.0°C Typical
Input Impedance: 100 M. min
Lead Resistance Effect: <20µV per 350.
Open thermocouple and overrange indication
Input Burnout: Protection to 250
User Selectable: °C or °F
D5450 THERMISTOR INPUTS
Thermistor Types: 2252 Ohm
Range: 0 to + 100°C
Resolution: 0.01°C or °F
Accuracy: ± 0.1°C
Input Protection: to 30 Vdc
User Selectable: °C or °F

订购所有价格均为人民币税前价格，不包括13%增值税和运费！(指定型号)

其他客户同时购买: 这个图标可以点击扩大，跳出的清单包括了其他客户在购买此产品时同时购买的其它产品。

产品编号产品描述

数量

产品描述

Voltage Input Modules

D5111

¥2,792.58

货期: 2 周

100 mV input, RS-232C output

D5112

¥2,792.58

货期: 10 周

100 mV input, RS-485 output

D5121

¥2,792.58

货期: 10 周

1 V input, RS-232C output

D5122

¥2,792.58

货期: 10 周

1 V input, RS-485 output

D5131

¥2,792.58

货期: 2 周

5 V input, RS-232C output

D5132

¥2,792.58

货期: 6 周

5 V input, RS-485 output

D5141

¥2,792.58

货期: 2 周

10 V input, RS-232C output

D5142

¥2,792.58

货期: 2 周

10 V input, RS-485 output

D5151

¥2,792.58

货期: 2 周

100 V input, RS-232C output

D5152

¥2,792.58

货期: 2 周

100 V input, RS-485 output

Current Input Modules

D5251

¥2,792.58

货期: 2 周

4 to 20 mA input, RS-232C output

D5252

¥2,792.58

货期: 10 周

4 to 20 mA input, RS-485 output

Thermocouple Input Modules

D5311

¥3,107.32

货期: 10 周

Type J thermocouple input, RS-232C output

D5312

¥3,107.32

货期: 10 周

Type J thermocouple input, RS-485 output

D5321

¥3,107.32

货期: 6 周

Type K thermocouple input, RS-232C output

D5322

¥3,107.32

货期: 2 周

Type K thermocouple input, RS-485 output

D5331

¥3,107.32

货期: 10 周

TypeT thermocouple input, RS-232C output

D5332

¥3,107.32

货期: 2 周

TypeT thermocouple input, RS-485 output

D5341

¥3,107.32

货期: 10 周

Type E thermocouple input, RS-232C output

D5342

¥3,107.32

货期: 10 周

Type E thermocouple input, RS-485 output

Thermistor Input Modules

D5451

¥2,792.58

货期: 10 周

2252 ohm thermistor input, RS-232C output

D5452

¥2,792.58

货期: 2 周

2252 ohm thermistor input, RS-485 output

Accessories

A1000

¥2,792.58

货期: 2 周

RS-232 to RS-485 Converter, 115 Vac power

A1000-230

¥2,792.58

货期: 6 周

RS-232 to RS-485 Converter, 230 Vac power

A2000

¥2,243.22

货期: 10 周

RS-232 to RS-485 Converter, 10-30 Vdc power

A1000-CABLE

¥183.81

货期: 6 周

5 ft. cable, male to female

† 所有金额以RMB显示
注: Each unit is supplied with a complete operator's manual.
订购示例: (1) D5111 four channel 100 mV input module with RS-232C output, ¥2,792.58