High Speed Load/Strain Meters and Process/Voltmeters, Dual Differential Inputs Available

DP7600

^¥21,955.00 DP7600

下单

5-Digit Display
Dual Inputs Available
All Programming and Calibrating Via 5 Front Panel Switches
Programmable Digital Filter, 1 to 500 Hz Cutoff
16-Bit A/D Converter (65000 Counts)
Tare (Zero) up to 50% of Span with Single Pushbutton
Peak Detect and Run Out Modes
115/230 Vac Power, Field Selectable

压力和应变测量仪器 - 查看相关产品

产品描述

The DP7600 is a high speed load/strain meter. The unit performs 1000 conversions per second with limit checking and peak/runout tracking done at a user selectable rate (from 1 to 500 Hz). Peak and runout data can also be displayed using the front panel switches. A tare reading, up to 50% of span, can be entered with a single front panel push button.
The DP7700 is a high speed process/voltmeter with many of the same features. The DP7700 accepts most process inputs from 0-200 mV to 0-10 Vdc and 4-20 mA current loops. Transducer/loop power of ±15 Vdc @ 50 mA is standard.
Programming both meters is accomplished via five switches located on the front panel. The text at the top of the switch (NORMAL, PEAK, RUNOUT, TARE, ABS/REL) indicates its normal function. The text at the lower half of the switch (ENTER, UP, DOWN, NEXT, EXIT) indicates the switch’s function during setup and calibration.

SPECIFICATIONS
DP7600 Load/Strain Gage Meter
Excitation: +10 Vdc @ 50 mA, +5 Vdc @ 25 mA
Coarse Gain Setting: Selectable by switches on rear of unit Full Scale mV ranges: 5.1, 10.2, 15.3, 20.0, 26.3, 30.6, 35.1, 39.2
Bridge Resistance: 100 to 5000 Ohms. 4-wire or 6-wire configuration
DP7700 Process/Voltmeter
Excitation: ±15 Vdc, ±5 Vdc @ ±50 mA
Range/Input Impedance: 0-200 m Vdc 10 x 10e12 Ohms 0-5 Vdc 1 MOhms 0-10 Vdc 1 MOhms 4-20 mA 10 Ohms
Range Selection: Selectable by dip switch on rear of the unit

GENERAL SPECIFICATIONS
Accuracy: ± 0.01% of reading ± 1 count of A/D @ 25°C/77°F
Temperature Coefficient: 50 ppm/°C
Operating Temperature: -20 to 60°C (-4 to 140°F)
Display: -32768 to +32767 with programmable decimal points 0.56" (14mm) red LED
A/D Resolution : 16-bit
Input Bias Current: ±50 nA max ±100 pA/°C (per input channel)
Normal Mode Rejection:70 db
Rollover Error: ± 2 counts of A/D @ 25°C/77°F
Channels:One channel standard with second channel optional
Digital Filter: Programmable cutoff frequency 1 Hz to 500 Hz.
Display update: 3 times per second
Reading Rate: Limited to 1000 per second divided by number of channels
Input Analog Filter: 4 pole active antialias. 500 Hz cutoff on single channel unit and 250 Hz cutoff on dual channel unit
Power: 115/230 Vac selectable by switch on rear of unit DC Power (Optional): 10-30 Vdc @ 600 mA
Power Consumption: 8 Watts
Construction: Aluminum case
Dimensions: 69 H x 132 W x 175 mm D (2.7 H x 5.18 W x 6.9" D) (including I/O connector)
Panel Cutout: 63 H x 129 mm W (2.45 H X 5.06" W)
Weight: 370 g (13 oz)

Examples of pricing for popular models is referenced in the "To Order" box. Use the "Part Number Builder" below to get pricing for all available models.

订购所有价格均为人民币税前价格，不包括13%增值税和运费！(指定型号)

产品编号产品描述

数量

产品描述

DP7600

咨询

货期:

High speed load and strain indicator

DP7600-R

咨询

货期:

High speed load and strain indicator with dual relay outputs

DP7600-A05

咨询

货期:

High speed load and strain indicator with 0-5 Vdc analog output

DP7600-S2

咨询

货期:

High speed load and strain indicator with RS232 serial

DP7700

咨询

货期:

High speed process voltage and current indicator

DP7700-R

咨询

货期:

High speed process voltage and current indicator with dual relay outputs

DP7700-A05

咨询

货期:

High speed process voltage and current indicator with 0-5 Vdc analog output

† 所有金额以RMB显示
注: For units with multiple options consult Pressure Engineering for availability.
订购示例: (1) DP7600-A05 high speed load and strain indicator with 0-5 Vdc analog output, ¥10,477.90

产品编号生成器

在此处生成您自己的产品编号

(1)	(2)

选项说明:

(1) Input Type 选项:
DP7600 for strain gage bridge inputs
DP7700 for process voltage or current inputs

(2) Option 选项:
for no option leave blank
-R for dual 2.5 A form "A" relays
-AMA for 4 to 20 mA analog output
-A05 for 0 to 5 Vdc analog output
-A10 for 0 to 10 Vdc analog output
-S2 for ASCII RS232 serial interface
-S4 for ASCII RS485 serial interface
-DUAL for Second input channel requires S2 or S4 option
-DC9/18 for 9 to 18 Vdc power @ 600 mA
-DC18/36 for 18 to 36 Vdc power @ 500 mA

注: 并非所有组合都有效，请查阅规格表上的有效产品编号。