查看下面所有型号
产品描述
The DR130 Series has been discontinued. Please see the RD5100 Series as a possible alternative or contact our Data Acquisition Engineering Department.|
Specifications Number of Inputs: Up to 10 or 20 points A/D Resolution: ±20,000 Reference Junction Compensation Error: ±1°C (1.8°F) (R, S, B, C, W), ±0.5°C/0.9°F (K, J, T, E, N, U, L CHROMEGAR vs. Au7% Fe) Scan Cycle Time: 2 to 60 sec selectable (2, 3, 4, 5, 6, 10, 12, 15, 20, 30, 60 sec) A/D Integration Time: 20 msec (50 Hz), 16.7 msec (60 Hz), and 100 msec (10 Hz), (50/60 Hz) selectable Input Impedance: >10 M on 2 V or lower ranges and T/C; approx. 1 M on 6 V or higher ranges Input Bias Current: <10 nA Thermocouple Burnout Protection: ON or OFF selectable for each channel Temperature Coefficient: zero drift; 0.01% of range/°C, full span; 0.01% of range/°C Max. Input Voltage: ±10 Vdc (60 V on 6 V or greater ranges) Common Mode Voltage: 250 Vrms ac (50/60Hz) Common Mode Rejection: 120 dB (50 or 60 Hz ±0.1%) Normal Mode Rejection: 40 dB (50 or 60 Hz ±0.1%) Max between Chan: 150 Vrms ac (50/60 Hz except RTD) Printout Printing Technique: Raster scan using a wire-dot printer and 10-color ribbon Effective Recording Span: 150 mm (5.9"), analog Chart: Z-fold chart, 230 mm (9") width, 20 m (65.5') long Recording Resolution: ±0.1 mm Recording Accuracy: measurement accuracy plus (±0.2% of effective recording span) Printout Format: analog trend/ analog trend plus digital datalogging Chart Speed: 1 to 1500 mm/hr Chart Drive: pulse motor drive Chart Speed Accuracy: ±0.1% Recording Modes: Normal, print on alarm, chart speed/interval changes at set alarm Standard Printing Functions: engineering units (up to 6 alphanumerics), tag number (up to 7 alphanumerics), alarms (channel number, alarm types, and the time of alarm On/Off), scale markings (0/100%, 0/50/100%, or 20% steps), program list, manual, message (max. 16 characters), and header (60 characters x 5 lines) DISPLAY AND CONTROLS Display: 5 x 7 dot matrix, 3 row, vacuum fluorescent; 1st row 22 large, 2nd & 3rd 40 small characters Data Display: measured data (tag number, channel number, alarm status, measured value, engineering unit), bargraph, clock, alarm status, relay status, programming data, battery status, and recording format (Trend/Log) Scaling Range: -30,000 to +30,000 Calculation: Difference between any channels or moving average for every 2 to 64 scans |
Internal Memory: 10 yr lithium battery back up; 512 KB SRAM with floppy disc drive option Optional Memory: 3.5 inch floppy; 1.4 MB or 720 K Alarms: up to 4/channel Outputs: 12 max with -A4 & -R1 opt Alarm Types: high (H), low (L), high rate of change (RH), low rate of change (RL), delta high (H) and delta low (L) Recording: Trend mode: CH# alarm types, and On/Off times in the right margin; logging mode: CH# and alarm types at the start of measured data Alarm Acknowledgement: pressing the ACK key stops the alarm display flashing and resets the dedicated common relay output Alarm Reset: hold type relay output by pressing the RESET key Display: flashing display can be obtained for 20 point alarm status (channels 1 to 20) plus one common point for computing channels (channels 31 to 60) GENERAL Ambient Operating Temperature: 5 to 40°C (40 to 104°F) Humidity Range: 20 to 80% Power Supply: 90 to 250 Vac, 50 or 60 Hz ±2% Power Consumption: approx 130 VA Clock: with calendar function Input Terminals: clamped input terminal block (standard) and screw input terminal block (optional) Mounting: desktop or flush panel MOST mounting (can be inclined up to 30° backward from vertical) Dimensions: 221 H x 338 W x 335 mm D (834 x 13516 x 13316") Weight: 9.3 kg (20.5 lb) approx. OPTIONAL FEATURES Alarm Outputs (-A4 option): 10 points, contact rating 30 Vdc or 250 Vac, 2 A resistive. AND, OR, REFLASH, or latching option type output Remote Control (-R1 option): Through the contact input, start/stop, chart speed/interval change, manual printout, message recording, digital recording in the trend mode, writing on the memory card, and loading trigger available. Input signal; TTL-level, open collector, and contact status,. plus 2 alarm outputs. GPIB Interface (-C1 option): conforms to IEEE standard 488-1978 RS-232C Interface (-C2 option): conforms to EIA RS-232C Computation (-M1 option): Functions: +, -, x, =, SQR (square root), ABS (absolute value), LOG (common logarithm), EXP (exponential), logic (AND, OR, NOT, XOR), CLOG & TLOG (group or channel; max, min, avg, totals, max minus min) Software: Runs on Windows95, 98 or NT 4.0. |
| Input Type and Range | Measurement (Digital Display and Printout) | |
| Accuracy | Resolution | |
| ±20.000 mVdc ±60.00 & ±200.00 ±2.0000 Vdc ±6.000 & ±20.000 ±50.00 Vdc | ±(0.05% of rdg + 5 digits) ±(0.05% of rdg + 2 digits) ±(0.05% of rdg +2 digits) ±(0.05% of rdg +2 digits) ±(0.05% of rdg +2 digits) | 1 µV 10 µV 100 µV 1 mV 10 mV |
| R 0 to 1760°C S 0 to 1760°C B 0 to 1820°C | ±(0.05% of rdg + 1°C) however: R,S: 0 to 100°C ±3.7°C 100 to 300°C ± 1.5°C and B: 400 to 600°C ± 2°C | 0.1°C |
| K -200 to 1370°C | ± (0.05% of rdg + 0.7°C) however: -200 to -100°C ± (0.05% of rdg + 1°C) | 0.1°C |
| E -200 to 800°C J -200 to 1100°C T -200 to 400°C J DIN (L) -200 to 900°C T DIN (U) -200 to 400°C | ±(0.05% of rdg + 0.5°C) however: J, L DIN: -200 to -100°C ±(0.05% of rdg + 0.7°C) | |
| Kp vs Au7Fe 0 to 300K | ±(0.05% of rdg + 0.7K) | 0.1K |
| N 0 to 1300°C | ±(0.05% of rdg + 0.7°C) | 0.1°C |
| C (W) 0 to 2315°C | ±(0.05% of rdg + 1°C) | |
| PT100 -200 to 600°C | ±(0.05% of rdg + 0.3°C) | 0.1°C |
| PT100 -140 to 150°C | ±(0.05% of rdg + 0.3°C) | 0.01°C |
| Ni100/120 -60 to 180°C | ±(0.05% of rdg + 0.3°C) | 0.1°C |
| Cu10Ω -200 to 300°C | ±(0.2% of rdg + 0.7°C) | 0.1°C |
产品手册:
