Economical Purge Variable Area Flow Meters - DISCONTINUED

FL-1000 Series

Economical Purge Variable Area Flow Meters

查看下面所有型号

下单

±10% Full Scale Accuracy
±1% Full Scale Repeatability
Low Pressure Drop
Polycarbonate Construction
Direct Reading Scales for Air and Water
Fully Rotatable Line Connectors for Easy Hookup
Convenient Panel Mounting
Integral Flow Control Valve

产品描述

The FL-1000 series has been discontinued. Please consider the FL-2000 for possible alternatives.

Advanced concepts and design at a very low cost – that’s the OMEGA™ FL-1000 Series of flowmeters, made of high-impact polycarbonate. These units are designed to provide a practical approach to low flow rate indication of non-corrosive liquids and gases at the lowest possible cost. The FL-1000 Series flow meter is equipped with a standard flow control valve. The FL-1000 flowmeter features a single unit polycarbonate tube, bezel and integral float stops for high impact resistance, with easy-to-read design, and ribbed tube construction for increased performance.
Ideal for low flow measurements.

SPECIFICATIONS
Accuracy: ±10% full scale
Repeatability: ±1% full scale
Meter Body, Clean-Out Plug, Float Stop: FDA Approved Polycarbonate
Floats: 316 Stainless Steel (spherical)
O-Rings: Buna
Line Connectors: Stainless Steel
Valve: Stainless Steel

Scales
Nominal Length: 37 mm (1.46")
Display: Direct reading for air or water

Ratings
Maximum Operating Pressure: 100 psig
Operating Temperature: -29 to 54°C (-20 to 130°F). Fluid temperatures below 0°C (32°F) can cause frosting of plastic meter body
Connections: 1/8 FNPT, horizontal (inlet and outlet); fully rotatable
Flush Panel Mount Cutout: 94 x 24 mm (3.72 x .94")
Max Panel Thickness: 4.76 mm (3/16")
Pressure Drop:
   FL-1002: 96" water
   FL-1004: 136" water
   FL-1006: 191" water