PLASTIC PADDLEWHEEL FLOWMETERS

FPB1400 Series

Plastic Paddlewheel Flowmeters

查看下面所有型号

下单

Easy to Install and Operate
Mounts in Any Direction
Only One Moving Part
Visual Flow Indication
Female NPT Ports
Polypropylene or PVDF Models

涡轮和叶轮流量计 - 查看相关产品

产品描述

Fluid flowing through the FPB1400 causes the paddlewheel to spin. As the magnets embedded in the paddle spin past the sensor, electrical pulses are produced in which frequency is proportional to the flow rate. The number of pulses per desired time interval and the K-factor (number of pulses/gallon) make it is easy to calculate the flow rate and volume passing through the unit.

SPECIFICATIONS
Accuracy: ±1% FS
Max Temperature: 60°C (140°F)
Max Pressure: 10 bar (150 psig)
Power: 5 to 24 Vdc @ 2 mA
Output Signal: NPN open collector (load 30 mA max)
Body Dimensions: 56 H x 108 L x 53 mm D (2.2 x 4.25 x 2.2")
Cable: Flow 1.8 m (6'), RTD 0.3 m (1') (-RTD models)
RTD: Platinum 0.00385 TCR, meets EN 60751, Class B (-RTD models)
Max Pressure Drop: 15 psi on size 2 units 20 psi on all other sizes
Viscosity: Calibrated 1 cSt, up to 50 cSt with field calibration
Response Time: At 1 sec 10 to 90% of full scale, at 2 sec below 10% of full scale
Wetted Materials Polypropylene Models
Body: Polypropylene
LID: Acrylic
Paddlewheel: PVDF
Shaft: Nickel tungsten carbide
Bearings: Sapphire jewels
O-Rings: EPDM
RTD: 316 SS casing PVDF Models
Body: PVDF
LID: PVDF
Paddlewheel: PVDF
Shaft: Zirconia ceramic
Bearings: Sapphire jewels
O-Rings: PTFE
RTD: 316 SS casing (-RTD models)

订购所有价格均为人民币税前价格，不包括13%增值税和运费！(指定型号)

产品编号产品描述

数量

产品描述

FPB1402

¥4,886.36

货期: 8 周

Polypropylene flowmeter

FPB1404

¥4,886.36

货期: 8 周

Polypropylene flowmeter

FPB1406

¥4,886.36

货期: 8 周

Polypropylene flowmeter

FPB1402-RTD

¥6,170.49

货期: 8 周

Polypropylene flowmeter

FPB1404-RTD

¥6,170.49

货期: 8 周

Polypropylene flowmeter

FPB1406-RTD

¥6,170.49

货期: 8 周

Polypropylene flowmeter

† 所有金额以RMB显示
注: Comes complete with operator’s manual.