容积式(PD)流量计

FTB3001,FTB3002

Positive Displacement (PD) Flowmeters

^¥48,196.53 FTB3002

下单

Toothless Oval Gear Construction (Patented)
High Accuracy
Compact Design
High Resolution Electronic Output
Temperatures to 176°C (350°F)
Pressure Rated to 3000 PSIG with 1 NPT Fitting Standard
Multiple Bearing Options
316 Stainless Steel Construction (Standard)
No Special Gears Needed for High Viscosity
Linearity Unaffected by Viscosity Changes
1 MNPT End Fitting Standard, Flange Optional

涡轮和叶轮流量计 - 查看相关产品

产品描述

The oval-shaped smooth gears in the FTB3000 Series are used to displace a precise volume of fluid,which is passed through th emeasurement chamber during each revolution. The toothless design,working with the fluid being measured, provides a complete viscous seal within the measuring chamber. This sealing effect provides for greater flow measurement accuracy.

The displacement of the fluid is translated via a magnetic or Hall-effect pick-up into a pulse output that is proportional to the flow.

The unique design of the FTB3000 oval gear meter incorporates two smooth(toothless) oval gears positioned 90 degrees out of phase. The measurement gears are held together by two timing gears. The standard meter contains no seal between the measurement chamber and the timing chamber. The timing gears have a pitch diameter equal to the outside diameter of the measurement gears. The flow through the meter measurement chamber follows the path of least resistance. Therefore, no liquid passes through the center cavity between the measurement gears. The fluid is displaced from the inlet to the outlet via the area between the smooth oval gear and the inner diameter of the meter housing.

Conventional oval gears have teeth that mesh. One of the advantages of smooth oval gears is that the viscous flow does not get trapped or squeezed between the gears. Typically, oval gears need to have cuts made in the teeth to allow high viscosity fluids to pass. These cuts result in a decrease in accuracy.

SPECIFICATIONS
Service Fluid: Clean liquids, max particle size 3.175 mm (0.125")
Accuracy: ±0.25% of reading
Viscosity: 100 cSt or greater
Repeatability: ±0.05%
Operating Temperature:
FTB3001: -240 to 176°C (-400 to 350°F)
FTB3002: -40 to 150°C (-40 to 302°F)
Operating Pressure: 3000 psig standard
Wetted Parts: 316 SS body and gears with PEEK™ gear seats
Bearings: Shielded, self-lubricating 440 SS ball bearings
Connections: 1 MNPT
Pick Up Coil: Magnetic type or Hall Effect (6 to 24 Vdc power)
Calibration: Ten-point calibration traceable to NIST @ 100 centistokes
Weight: 7.53 kg (16.6 lb)

订购所有价格均为人民币税前价格，不包括13%增值税和运费！(指定型号)

其他客户同时购买: 这个图标可以点击扩大，跳出的清单包括了其他客户在购买此产品时同时购买的其它产品。

产品编号产品描述

数量

产品描述

FTB3001

¥48,196.53

货期: 10 周

2 to 25 GPM rate, magnetic pick-up

FTB3002

¥48,196.53

货期: 10 周

0.02 to 25 GPM rate, Hall-effect sensor

Accessories

U24Y175

¥1,713.71

货期: 库存

24 Vdc, 175 mA power supply

DPF701

咨询

货期:

Panel meter for rate or total

MS3106F-10SL-3S

¥905.01

货期: 2 周

Replacement mating connector for FTB3000 Series

† 所有金额以RMB显示
注: Add suffix “-150LBF” (150 lb stainless steel flange) or “-300LBF” (300 lb stainless steel flange) to the part number and $250 to the price.

Comes complete with operator’s manual, mating connector, and 10-point NIST calibration.

订购示例: (1) FTB3002 Hall effect output, max temp. 150°C (302°F) unit with operator’s manual and 10-point NIST calibration, ¥48,196.53