楔形流量计
压差设计

FW1000 Series

查看下面所有型号

下单

No Required Inlet or Outlet Straight Plumbing
±2% Full Scale Accuracy
±0.5% Full Scale Repeatability
Compact and Rugged
Linear Analog Output

产品描述

The FW1000 Series has been discontinued. Please see the FDT7000 Series as a possible alternative or contact our Flow Engineering Department.

The FW1000 series are minimally invasive, low-cost segmented wedge flow sensors. The segmented wedge element provides a simple and reliable restriction for sensing flow as related to pressure differential. The FW1000 design allows users to install the meter in any full pipe orientation (horizontal, vertical or inverted). It is compact and rugged measuring less than 254 mm (10") long and 89 mm (3½") wide, with a flanged mounting base for simple installation. This series is offered with several ranges of calibration to accommodate the requirements typical to process water applications. Three standard NPT port sizes are available to accommodate installations. The standard unit can also be converted to a 1 to 10 Vdc output in the field.

SPECIFICATIONS
Accuracy: ±2% of full-scale
Repeatability: ±½% of full-scale
Maximum Operating Pressure: 8.6 bar (125 psig) Maximum Operating Temperature: 76°C (170°F)
Standard Test Media: Tap water @ 21°C (70°F)
Electronic Output: 0 to 5 Vdc (standard), 4 to 20 mA (optional)
Power Requirements: 12 to 35 Vdc
Flow Measuring Range: 0.5 to 15 GPM (1.9 to 57 LPM) full-scale
Turn Down Ratio: 10:1
Maximum Current Consumption: <50 m ADC
Minimum Load Resistance: 1000 Ω
Maximum Transmission Distance: <61m (<200')
Resolution: Infinite
Response Time:<500 mS to 90% (step change)
Protection: Short circuit, transient and reverse polarity
End Ports: PVC
Wedge Element: PVC
Pressure Sensor: Polyetherimide
Electrical Enclosure: Polycarbonate

† 所有金额以RMB显示
注: Comes complete with operator's manual.
订购示例: (1) DPF64 Digital rate meter, ¥3,518.85 plus (1) TX4-100 Multi conductor wire, ¥442.65, ¥3,518.85 + 442.65 = ¥3,961.50

产品编号生成器

在此处生成您自己的产品编号

	(1)	(2)	(3)
FW1

选项说明:

(1) Fittings 选项:
1 for 3/8 NPT
2 for 1/2 NPT
3 for 3/4 NPT

(2) Range 选项:
05 for 0.5 to 5 gpm
10 for 1 to 10 gpm
15 for 1 to 15 gpm

(3) Output 选项:
无（选项为空白） for 0 to 5 Vdc
-I for 4 to 20 mA

注: 并非所有组合都有效，请查阅规格表上的有效产品编号。

楔形流量计压差设计

FW1000 Series

楔形流量计
压差设计