Removes Oil, Water and Particles from Compressed Air
Excellent Flow and Regulation Characteristics
¼ PTF Inlet/Outlet Ports
Maximum Outlet Pressure 7 bar (100 psig)
Transparent Polycarbonate Bowl with Manual Drain
产品描述
The HEFR series has been discontinued. Please contact our Flow Engineering department for a viable replacement.
The HEFR Series high efficiency air filter-regulator will remove liquid and solid contaminants down to 0.01µm. These air filter/pressure regulators are designed for in-line use as a single
regulating filtering source for compressed air. They include ¼" PTF inlet and outlet threads, a transparent bowl, relieving diaphragm, and a gauge. Two adjustable pressure range models are available, 0.3 to 7 bar (5 to 100 psig) and 0.1 to 0.7 bar (1 to 10 psig). They are suitable for a wide range of pneumatic tools and components and an excellent point of use filter/regulator. These units come with a wall mounting bracket or can be panel mounted with a 30 mm
(1.19") diameter mounting hole.
SPECIFICATIONS Dimensions: 214 H x 97.8 W x 73.2 mm D (8.41 x 3.85 x 2.88") Fluid: Compressed air Maximum Inlet Pressure: 10 bar (150 psig) Maximum Outlet Pressure: 7 bar (100 psig) Operating Temperature: -34 to 50°C (-30 to 125°F) Note: Air supply must be dry enough to avoid ice formation at temperatures below 2°C (35°F) Maximum Flow: 178 l/min (6.3 scfm) Filtration: Water, oil and particulate to 0.01 µm Ports: ¼ PTF inlet/outlet, 1/8 FPT gauge, 1/8 MPT drain Bowl Size: 31 ml (1 fluid oz) MATERIALS Body: Zinc Bonnet: Acetal Bowl: Polycarbonate Brass/Nitrile Filters: Synthetic fiber and polyurethane, sintered polypropylene Elastomers: Neoprene and Nitrile, comes with wall bracket and gauge
† 所有金额以RMB显示 注: Comes complete with operator’s manual, wall bracket and gauge.
