BIG Bright 2.25" (57.2 mm) or 4.00" (101.6 mm) LEDs
BIG 7-segment LEDs, 4 or 6-Digits
Program to Change Colors: RED, AMBER, GREEN
RS-232/RS-485 Input
Ethernet Input
产品描述
Starting from Feb 1st 2018, ILD-EI & C2 Series have been discontinued. As a possible substitute, please check out the ILD-UTP & SP Series or the LDB Series for details.
The "Serial RS-232 BIG Remote Display" (iLD-C2) are 4 or 6 digit slave displays providing remote readout from instruments such as programmable controllers,
digital panel meters and other instruments with serial output.
Two communication interfaces are supported in Remote Display: RS-232 and RS-485 and can be programmed through front panel buttons.
The iLD-C2 can display data transmitted via serial communications from a computer, or from other devices which transmit ASCII data via RS-232 and RS-485. These BIG
Displays are compatible with virtually all OMEGA™ devices that feature serial communications including: iSeries meters and controllers, DP41
digital panel meters, MICROMEGA™ controllers, iDRX DIN-RAIL mounted signal conditioners, and many more.
The "Ethernet BIG Remote Display" (iLD-EI) are 4 or 6-digit slave displays providing remote readout from instruments with an Ethernet output or display data
from a computer.
The iLD-EI can display data transmitted via Ethernet from Omega instruments that have an Ethernet output option, (iSeries with -EI). You can tunnel or display the
same data from a computer using telnet. Any two units with Ethernet option (iSeries with -EI or iServer) can talk to each other over the Ethernet LAN, WAN, and Internet
using TCP/IP protocol. This allows the connected serial devices to an iServer to communicate with each other back and forth over TCP/IP networks.
Programmable Color Display
The iLD-C2 and iLD-EI feature BIG bright 7-segment LED's that can be programmed to change colors between RED,
AMBER, and GREEN to indicate visual alarms.
In the "slave" mode, the BIG remote displays can be used for displaying alphanumerical characters from a computer using serial connection (iLD-C2) or Telnet
(iLD-EI). Compatible Host device must feature serial RS-232 or RS-485 output.
The BIG Display can be mounted flush in a panel or surface mounted with the included brackets. The entire BIG Display enclosure provides NEMA 4 (IP65) protection.
Whether panel-mounted or surface-mounted, the BIG Display does not need to go inside a bulky and expensive NEMA enclosure.
† 所有金额以RMB显示
产品编号生成器
在此处生成您自己的产品编号
选项说明:
(1)
Size of Digit Display 选项: 24 for 57 mm (2.25 inch) 4-digit display 44 for 101 mm (4 inch) 4-digit display 26 for 57 mm (2.25 inch) 6-digit display 46 for 101 mm (4 inch) 6-digit display
(2)
Input Type 选项: EI for Ethernet Input C2 for RS232/485 Input
