通孔螺栓称重传感器
外径为1.5 Inch

LC8150

Low Profile Through-Hole Load Cells, 1.5 Inch O.D.

^¥6,700.03 LC8150-250-100

下单

5 Point NIST Traceable Calibration with
59 kOhm Shunt Cal Data
Low Profile
All Stainless Steel Construction
Rugged Industrial Design
I.D. From 0.100 to 0.500
Ranges 100 to 5000 lbf.

称重传感器，力传感器和扭力传感器 - 查看相关产品

产品描述

The LC8150 Series Donut Load Cell is an economical solution to applications requiring a through-hole design. With its extremely low profile and compact design, this load cell is ideal for applications such as clamping forces, bolt loading forces and other compressive loads. This series, with its all stainless steel construction and environmental protection, has proven its reliability in tough industrial applications.

SPECIFICATIONS
Output: 2 mV/V nominal
Input: 10 Vdc (15V max)
Linearity: ± 0.5% FSO
Repeatability: ± 0.1% FSO
Zero Balance: ±2.0% FSO
Operating Temp Range: -54 to 121°C (-65 to 250°F)
Compensated Temp Range: 16 to 71°C (60 to 160°F)
Thermal Effects:
Zero: ±0.009% FSO/°C
Span: ±0.018% rdg/°C
Safe Overload: 150% of capacity
Ultimate Overload: 300% of capacity
Deflection: 0.076 mm (0.003") nominal
Input Resistance: 360 Ω minimum
Output Resistance: 350 ±5 Ω
Construction: 17-4 PH stainless steel
Electrical: 1.5 m (5') 4-conductor shielded cable

订购所有价格均为人民币税前价格，不包括13%增值税和运费！(指定型号)

产品编号产品描述

数量

产品描述

LC8150-250-100

¥6,700.03

货期: 12 周

Thru hole load cell, 1.5" OD, 0.250" ID, 0-100 lb capacity

LC8150-250-250

¥6,700.03

货期: 10 周

Thru hole load cell, 1.5" OD, 0.250" ID, 0-250 lb capacity

LC8150-250-500

¥6,700.03

货期: 10 周

Thru hole load cell, 1.5" OD, 0.250" ID, 0-500 lb capacity

LC8150-250-1K

¥6,700.03

货期: 8 周

Thru hole load cell, 1.5" OD, 0.250" ID, 0-1,000 lb capacity

LC8150-250-2K

¥6,700.03

货期: 6 周

Thru hole load cell, 1.5" OD, 0.250" ID, 0-2,000 lb capacity

LC8150-250-3K

¥6,700.03

货期: 10 周

Thru hole load cell, 1.5" OD, 0.250" ID, 0-3,000 lb capacity

LC8150-250-5K

¥6,700.03

货期: 6 周

Thru hole load cell, 1.5" OD, 0.250" ID, 0-5,000 lb capacity

LC8150-500-250

¥6,700.03

货期: 8 周

Thru hole load cell, 1.5" OD, 0.50" ID, 0-250 lb capacity

† 所有金额以RMB显示
订购示例: (1) LC8150-375-500 is a 500 lb capacity load cell with 1.50" O.D. and 0.375" I.D.,, ¥6,700.03

产品编号生成器

在此处生成您自己的产品编号

	(1)		(2)
LC8150-		-

选项说明:

(1) Inside Diameter 选项:
100 for 0.100 inch ID
125 for 0.125 inch ID
200 for 0.200 inch ID
250 for 0.250 inch ID
312 for 0.312 inch ID
375 for 0.375 inch ID
500 for 0.500 inch ID

(2) Range 选项:
100 for 0-100 lb range
250 for 0-250 lb range
500 for 0-500 lb range
1K for 0-1000 lb range
2K for 0-2000 lb range
3K for 0-3000 lb range
5K for 0-5000 lb range

注: 并非所有组合都有效，请查阅规格表上的有效产品编号。

通孔螺栓称重传感器外径为1.5 Inch

LC8150

通孔螺栓称重传感器
外径为1.5 Inch