Remote Relay Controller Mounts on 35 mm DIN Rail or Panel Installation
Fail-Safe Relay for Actuation of Pumps, Valves or Alarms
Offered in One and Two Relay Configurations
LED Indicators for Sensor, Relay and Power Status
0-60 Second Time Delay Dampens Out Relay Chatter
Invert Switch Provides Simple NO or NC Relay Operation
产品描述
The LVCN-131 & LVCN-141 series have been discontinued. Please contact our Flow Engineering department for a viable replacement.
The LVCN-141 flow switch controller is commonly
used as a low flow shut off for pumps or process
protection with a single switch input. The LVCN-131
flow switch controller is commonly used as a dual low
flow shut off for pumps or process protection with two
independent switch inputs. Select the
FST-200/300
or FST-320
series flow switches only for use with these remote
relay controllers.
SPECIFICATIONS Supply Voltage: 120/240 Vac, 50 to 60 Hz Consumption: 5 Watts Sensor Supply: 13.5 Vdc @ 100 mA Relay Type: LVCN-141: (1) SPDT LVCN-131: (2) SPDT Relay Load: 250 Vac, 10 A, 1/2 hp Relay Model: Selectable, NO or NC Time Delay: 0 to 60 seconds LED Indication: Sensor, relay and power status Fail Safety: Power fail-safe Temperature Rating: -40 to 70°C (-40 to 158°F) Enclosure Type: 35 mm DIN (EN 50 022) Enclosure Material: Polypropylene (U.L. 94V0) Dimensions: 99 L x 69 W x 91 mm D (3.9 x 2.7 x 3.6") CE Approval: optional; complies with EN50082-2 immunity, EN55011 emission and EN61010-1 safety standards.
† 所有金额以RMB显示 注: Comes complete with operator's manual.
For CE approved controller, add suffix "-CE" to the model number, add $50 to the price. The CE approved configuration complies with EN50082-2 immunity, EN55011 emission and EN 61010-1 safety standards.
Select the FST-200/320 Series only for use with these controllers.
(OPTIONS SHOWN IN THIS "NOTE" ABOVE ARE PRICED IN US$)
订购示例: (1) LVCN-141-CE CE approved configuration, ¥3,329.84
