The OM11 Series has been discontinued. Please see the DRA-WVT-3 Series as a possible alternative or contact our Data Acquisition Engineering Department.
The OMEGA OM11 transducers accept ac voltage and current to produce a two conditioned dc process signal outputs representing wattage and Volt Amp Reactance (VAR). Single, dual, and three element models are available to accommodate a variety of wiring configurations. For larger input voltages and currents, the OM11 transducers may also be used with OMEGA’s voltage and current transformers.
SPECIFICATIONS Accuracy: 0.2% of reading Sustained Input Overrange: Voltage, 120% continuous, 150% for 5 seconds; current, 200% continuous, 1000% for 5 sec Outputs: 0 to 1 mA dc, 0±1 mA DC: into 10 kΩ 10 Vdc compliance; 4 to 20 mA DC, 12±8 mA DC into 750Ω max 15 Vdc compliance Zero Adjust: ± 5% min Span Adjust: ±10% min Response Time: >400 msec; 0 to 99% of full scale Power Consumption: 5 VA max Isolation: Input to output: 2500 Vac, 60 Hz, 1 min; input to power: 2500 Vac, 60 Hz, 1 min; input to case: 2500 Vac, 60 Hz, 1 min; power to output: 2000 Vac, 60 Hz, 1 min; power to case: 2000 Vac, 60 Hz, 1 min; output to case: 500 Vac, 60 Hz, 1 min Dimensions: 12 H x 11.2 W x 9.6 cm D (4.717 x 5.236 x 3.769")
