Built-In Thermostat Turns on at Temperatures Below 4.4°C (40°F) and Turns Off at 15.5°C (60°F)
Resistant to Many Chemical Substances
Easy to Install/Uninstall
Components UL Recognized and CSA Certified
Custom Lengths Available
APPLICATIONS
Freeze Protection and
Frozen Pipe Thawing:
Water Pipes
Dairy and Livestock Facilities
Wineries/Breweries
产品描述
The PH1 series has been discontinued. Please see the HTWT101 series as a possible alternative or contact our Temperature Engineering department.
Ready-to-use pipe heaters are
made of wire-wound circuits
laminated between thin layers
of fiberglass-reinforced, high temperature
insulation, silicone
rubber. Pipe heaters are used
to provide freeze protection and
frozen pipe thawing in a variety of
indoor and outdoor applications.
They are pre-formed in a spiral
configuration for easy and quick
wrapping/unwrapping around
metal pipes. The thermostat end
secures to the pipe with Velcro®
tape, making installation and
deinstallation/re-use also quick
and easy. A built-in, surface
sensing thermostat maintains the
temperature to prevent freezing
or condensation along the pipe.
The thermostat turns on at
temperatures below 4.4°C (40°F)
and turns off at 15.5°C (60°F).
Silicone rubber heaters are
resistant to temperature extremes,
moisture, weathering, radiation,
fungus and chemical attack.
They also have a high dielectric
strength, flexibility, and provide a
cost effective heating solution.
Specifications Material and Construction: Fully
vulcanized fiberglass-reinforced
silicone rubber encapsulating a nickel
alloy or thin foil heating element Voltage: 115 Vac Power Density (115V): 2.5W/in2 Operating Temperature Range:
Turns on at temperatures below
4.4°C (40°F) and turns off at
15.5°C (60°F) Resistance Tolerance: ±10% Thickness: Approximately 32 mm
(0.08") Cord: Plug: 2-prong Length: 1.8 m (6') Component Approvals: UL, CSA High-Potential Dielectric Testing:
1250V
