SPUTTERED THIN FILM PRESSURE TRANSDUCER GAGE/ABSOLUTE/SEALED GAGE

PX1000_Series

查看下面所有型号

下单

Proven Sensor Design
Rugged Dual Case Isolation
High Performance
Highly Reliable
Long-Term Stability

压力传感器 - 查看相关产品

产品描述

The OMEGA™ PX1000 Sputtered Thin Film Transducer is noted for high accuracy and excellent long-term stablility and reliability. Performance stability is ±0.1% for any combination of constant pressure and temperature within the operating range. The thermal error band performance is typically better than 0.25% within any 50°F temperature band. Highly stable sensing elements are achieved by sputtered film deposition which–coupled with advanced structural design– create tranducers with maximum, combined nonlinearity, hysteresis and nonrepeatability error of 0.25% FSO. Available in many standard ranges from 15 psi to 10,000 psi, the basic design of the PX1000 features all welded construction with proven strain isolation. The PX1000 sputtered gage pressure tranducers are manufactured in accordance with the program quality requirements of MIL-Q-9858A

Specifications
ELECTRICAL
Excitation: 10 Vdc rated (15 Vdc maximum)
Output: 30 mV typical, 26 mV minimum
Residual Unbalance: Within ±2% FSO
Bridge Resistance: 400 Ω nominal
Combined Linearity, Hysteresis and Nonrepeatabilty: ±0.25% FSO, BSL
Insulation Resistance: 500 MΩ or greater at 45 Vdc
Breakdown Voltage: 100 Vdc or pk ac between case and any terminal without damage
Shunt Calibration: Provisions for single-arm, external shunt calibration
Sensing Element: 4-active-arm bridge using sputter-deposited thin-film elements
ENVIRONMENTAL
Operating Temp Range: -54 to 150°C (-65 to 300°F)
Compensated Temp Range: -54 to 121°C (-65 to 250°F)
Thermal Effects:
    Span: ±0.005% FSO/°F
    Zero: ±0.005% FSO/°F
Thermal Stability:
    Span: 0.10% FSO
    Zero: 0.15% FSO
Vibration Sensitivity: At 35 g peak from 10 Hz to 2000 Hz (1/2" D.A. maximum), the output shall not exceed 0.04% FSO/g for 15 psi units decreasing logarithmically to less than to 0.001% FSO/g for 10,000 psi units
Natural Frequency: 80 kHz for 10,000 psi decreasing logarithmically to 5 kHz at 15 psi
Shock: Qualification level of 100 g, 11 msec half sine wave without damage
Humidity: Absolute, sealed per MIL-STD-810; Vented gage – external case limited to dry, non-corrosive. non-conoductive gasses
Performance Stability: ±0.1% FSO for a minimum of 24 hours when subjected to any combination of constant temperature and pressure within specified limits
PRESSURE
Standard Ranges: 0 to 15, 25, 50, 100, 250, 500, 1000, 1500, 2000, 2500, 5000 and 10,000 psia, Absolute and Sealed. gage available in ranges of 100 psi and above.
Proof of Pressure: 200% times rated pressure not to exceed 15,000 psi, will not cause changes in performance beyond the specified tolerances
Burst Pressure: 300% of rated pressure not to exceed 20,000 psi
MECHANICAL
Wetted Parts: 17-4 PH stainless steel
Pressure Fitting: 7/16-20 male per MS33656-4
Weight: 145 g (5 oz) maximum
Mating Connector: PTS06A-10-6S (sold separately)

订购所有价格均为人民币税前价格，不包括13%增值税和运费！(指定型号)

产品编号产品描述

数量

产品描述

Absolute Pressure

PX1000L1-015AV

咨询

货期:

0 to 15 psi

PX1000L1-025AV

咨询

货期:

0 to 25 psi

PX1000L1-050AV

咨询

货期:

0 to 50 psi

PX1000L1-100AV

咨询

货期:

0 to 100 psi

Gage Pressure

PX1000L1-015GV

咨询

货期:

0 to 15 psi

PX1000L1-025GV

咨询

货期:

0 to 25 psi

PX1000L1-050GV

咨询

货期:

0 to 50 psi

PX1000L1-100GV

咨询

货期:

0 to 100 psi

PX1000L1-250GV

咨询

货期:

0 to 250 psi

PX1000L1-500GV

咨询

货期:

0 to 500 psi

PX1000L1-1KGV

咨询

货期:

0 to 1000 psi

PX1000L1-1.5KGV

咨询

货期:

0 to 1500 psi

PX1000L1-2.5KGV

咨询

货期:

0 to 2500 psi

PX1000L1-3KGV

咨询

货期:

0 to 3000 psi

PX1000L1-5KGV

咨询

货期:

0 to 5000 psi

PX1000L1-10KGV

咨询

货期:

0 to 10,000 psi

† 所有金额以RMB显示
注: Interchangeable with CEC Model 1000 Metric ranges available – Consult Engineering. To order sealed gage pressure, replace “G” in model number with “S” (no additional charge). Interchangeable with CEC Model 1000 Metric ranges available – Consult Engineering.