用于PX750变送器的智能改造套件

PX750 Smart Kit

Smart Retrofit Kit for PX750 Transmitters

查看下面所有型号

下单

The Most Economical Way to Convert a Loop to Smart
Simple Plug-in Design
Compatible with PX750 Transmitters from 5 inH2O to 6000 psi
Integral Span and Zero Push Buttons
Digital Hart Communications Using Hart Protocol without Interrupting Output Signals

产品描述

The PX750-SMART-KIT is the most economical way to obtain the benefits of smart electronics. The Smart electronics is a single board that is backward compatible with the installed base of PX750 transmitters with ranges from 5 inH2 O to 6000 psi.The retrofit kit allows remote communications, reranging and self diagnostics. A retrofitted transmitter features integral zero and span buttons for convenient reranging at the transmitter site. The electronics are also capable of linear and square root outputs which are software selectable. Failure alarm mode adjustable damping and Transmitter security features are also standard. The retrofitted PX750 communicates with the HART communicator and any other hosts implementing the HART communications protocol. The PX750-SMART-KIT is easy to install, five easy steps convert your analog transmitter to a smart transmitter. The kit contains everything needed to convert a PX750 analog transmitter into a HART ready SMART transducer. Included is the smart electronics package, circuit board spaces, terminal eyelets, standoffs, cover and cover O-ring.

SPECIFICATIONS
Power Supply: 12 to 45 Vdc max load = 43.5 x (Supply volts -12)
Rangeability: 15:1
Output: 4 to 20 mA, user selectable linear or square root; digital signal superimposed on 4-20 mA signal available to HART® protocol devices

† 所有金额以RMB显示
注: All parts needed plus complete instructions are included.

产品编号生成器

在此处生成您自己的产品编号

PX750-SMART-KIT

选项说明:

注: 并非所有组合都有效，请查阅规格表上的有效产品编号。