Provides 600 Vdc or peak ac Input to Output Isolation
Zero and Span Adjustability within User-selected Input Range
4 to 20 mA or 10 to 50 mA output signal
产品描述
The TX70 series has been discontinued. Please see the TX1500 as a possible alternative or contact our Data Acquisition Engineering department.
The TX70 Series 2-Wire Transmitters for thermocouples and RTD’s feature dip switch selection for input type and range. With the thermocouple models, the user may select from J, K or T input with one model, or E, R or S with another. All models feature 80% zero and span adjustability within any user-selected input range. Models are available with any desired input, with either a 4 to 20 mA or 10 to 50 mA output signal.
Ranging Example: the 0 to 500°C range for a type K thermocouple and a minimum span of 100°C, the user may select any 100° span within that 0 to 500°C range, such as 14 to 114°C or 379 to 479°C. Note: 2-wire transmitters are linearized to the voltage signal produced by a thermocouple, and not to the actual temperature.
† 所有金额以RMB显示 注: * It is recommended to purchase the TX-SCALED option. To order a unit scaled by OMEGA, specify input type, low end of range, high end of range and °F or °C in the Special Instructions field in the last step of the Ordering Process and Add model TX-SCALED to the cart. 订购示例: (1) TX71 Model TX71 isolated calibrated for Type J thermocouple and range of, ¥4,820.00
