Wireless pH/Temperature Transmitter

UWPH-2-NEMA

查看下面所有型号

下单

0 to 14 pH and 0 to 100°C (32 to 212°F) Ranges
Transmit pH and Temperature, Signal Strength and Battery Status in Real-Time
Free Software Converts Your PC into a Multi-Channel Chart Recorder or Data Logger
Low Power Operation and Sleep Mode for Long Battery Life
Works with UWTC Series Wireless Temperature, RH, Infrared Temperature, and Process Transmitters for a Complete Wireless System

无线传感器, 发送器, 接收器, 仪表和控制器 - 查看相关产品

产品描述

OMEGA’s new wireless pH/temperature transmitter features a high performance microprocessor based wireless radio transmitter built into a NEMA enclosure. Compatible with most pH probes with a BNC connector, the UWPH provides fast, accurate readings. For automatic temperature compensation, the UWPH accepts a Pt100 RTD probe through a standard (series T) connector. Configured through a standard USB port, the UWPH can transmit data at rates from 1 to 30 samples per minute. Each transmitted reading includes the pH and temperature data, along with RF signal strength and battery condition to the host. Using the standard software (included), this data can be displayed on screen in real time. The software allows the user to use your PC as a meter, chart recorder or data logger, so data can be saved, or exported to a spreadsheet file.

Wireless Receivers
ZW-REC: 127-channel wireless receiver with Ethernet for web-based monitoring
UWTC-REC1: 48-channel wireless receiver with USB
UWTC-REC2: 48-channel wireless receiver with USB and single analog output
UWTC-REC4: 48-channel DIN rail mount wireless receiver with USB and four analog output signals

SPECIFICATIONS
pH Input
   Input Range: 0 to 14 pH
   Accuracy: ±0.1 pH
   Resolution: 0.01 pH
   Response Time: 2 sec max
   Input Connection: BNC
   Temperature Compensation: Automatic, 0 to 100°C (32 to 212°F)
RTD Temperature Input
   Input Type: Pt100 O, 0.00385 curve
   Range: 0 to 100°C (32 to 212°F)
   Accuracy: ±1°C (1.8°F)
   Resolution: 0.1°
   Input Connection: TA3M receptacle;TA3F mating connector (included)
Computer Interface: USB
Transmit Sample Rate: Programmable from 2 sec to 2 min Radio Frequency (RF) Transceiver
Carrier: ISM 2.4 GHz, direct sequence spread spectrum
RF Output Power: 10 dBm (10 mW)
Range of RF Link:
Outdoor Line of Sight: Up to 120 m (400')
Indoor/Urban: Up to 40 m (130')
RF Data Packet Standard: IEEE 802.15.4, open communication architecture
Software (Included Free): Requires Windows® operating system
Power: One 3.6V, lithium “C” cell (included)
Battery Life (Typical): 3 years (at 1 sample/minute reading rate @ 25°C)
Enclosure: NEMA-4X polycarbonate
Enclosure Dimensions: 80 L x 82 mm W (3.15 x 3.23")

订购所有价格均为人民币税前价格，不包括13%增值税和运费！(指定型号)

其他客户同时购买: 这个图标可以点击扩大，跳出的清单包括了其他客户在购买此产品时同时购买的其它产品。

产品编号产品描述

数量

产品描述

UWPH-2-NEMA

咨询

货期:

Wireless pH/temperature transmitter

Accessories

PRTF-10-1-100-1/8-6-E-TA3F

咨询

货期:

RTD Probe w/TA3F use PIN 1& 2 Compatible w/ UWPH-2-NEMA

UWTC-CABLE

¥154.07

货期: 8 周

Spare USB programming/communication cable

PHE-1311

¥813.28

货期: 2 周

Gel-filled pH electrode, general purpose

† 所有金额以RMB显示
注: pH and RTD probes sold separately. To use without an RTD probe, a 110 ohm resistor must be connected to the RTD input. This will set the temperature input to a fixed value (about 26ºC).

Note: Because of transmission frequency regulations, these products may only be used in the United States, Canada and Europe(please note CE compliance of the specific model for use in Europe).

产品手册:

下载 Wireless pH/Temperature Transmitter

下载 pH/Temperature Transmitter with ATC