Pneumatic Valves, Directional Control Valves, 4-way valve
查看下面所有型号
产品描述
The V60 series has been discontinued. Please contact our Flow Engineering department for a viable replacement.3/2 valve is also known as a 2-Way valve (drawing 1), with 3 air ports and on-off output air. Port #1 is the supply air, port #2 is the control output air and port #3 is the exhaust air. | |
2 x 3/2 valve (drawing 2) is two independent 2-Way valves that share the same valve body. These valves can be manifold mounted with 2 or 3 valves per manifold. Port #1 is a shared supply air, port #2 & 4 are for the control output air and port #3 & 5 are for the exhaust air. | |
5/2 valve (drawing 3) is also known as a 4-Way valve with 5 air ports and 2 output air ports. This valve is typically used to extend and retract a cylinder. These valves can be manifold mounted with 2 or 3 valves per manifold. Port #1 is the supply air, port #2 & 4 are for the control output air and port #3 & 5 are for the exhaust air. | |
DRAWING NO. | TYPE | A | B | C | D | E | F | G | H | J | K | L | M | N | O | P | Q | R | S | T | U |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | V60 | 1.38 | 0.67 | – | 0.13 | 0.26 | 0.67 | 1/8 | 0.87 | 0.64 | 1.10 | – | 4.49 | 0.98 | 0.98 | 0.18 | 0.71 | 1.02 | 1.38 | – | – |
1 | V61 | 1.81 | 0.79 | – | 0.13 | 0.26 | 0.79 | 1/4 | 0.98 | 0.83 | 1.10 | – | 5.22 | 1.26 | 1.22 | 0.18 | 0.94 | 1.02 | 1.57 | – | – |
1 | V62 | 2.13 | 0.83 | – | 0.18 | 0.31 | 1.10 | 3/8 | 1.34 | 0.96 | 1.73 | – | 5.71 | 0.47 | 1.42 | 0.18 | 1.02 | 1.42 | 2.17 | – | – |
2 | V60 | 1.97 | – | 0.64 | 0.13 | 0.26 | 0.67 | 1/8 | 0.87 | 1.28 | 1.10 | 6.89 | – | 0.98 | – | 0.18 | 1.32 | 1.02 | 1.38 | – | – |
2 | V61 | 2.60 | – | 0.83 | 0.13 | 0.26 | 0.79 | 1/4 | 0.98 | 1.65 | 1.10 | 7.83 | – | 1.26 | – | 0.18 | 1.73 | 1.02 | 1.57 | – | – |
2 | V62 | 3.07 | – | 0.96 | 0.18 | 0.31 | 1.10 | 3/8 | 1.34 | 1.92 | 1.73 | 8.58 | – | 0.47 | – | 0.18 | 1.02 | 1.42 | 2.17 | – | – |
3 | V60 | 1.97 | 0.67 | 0.64 | 0.13 | 0.26 | 0.67 | 1/8 | 0.87 | 1.28 | 1.10 | – | 5.08 | 0.98 | 0.98 | 0.18 | 1.32 | 1.02 | 1.38 | – | – |
3 | V61 | 2.60 | 0.79 | 0.83 | 0.13 | 0.26 | 0.79 | 1/4 | 0.98 | 1.65 | 1.10 | – | 6.00 | 1.26 | 1.22 | 0.18 | 1.73 | 1.02 | 1.57 | – | – |
3 | V62 | 3.07 | 0.83 | 0.96 | 0.18 | 0.31 | 1.10 | 3/8 | 1.34 | 1.92 | 1.73 | – | 6.69 | 0.47 | 2.36 | 0.18 | 1.02 | 1.42 | 2.17 | – | – |
4 | V60 | 1.97 | – | 0.64 | 0.13 | 0.26 | 0.67 | 1/8 | 0.87 | 1.28 | 1.10 | 7.44 | – | 0.98 | 3.33 | 0.18 | 1.32 | 1.02 | 1.38 | – | – |
4 | V61 | 2.60 | – | 0.83 | 0.13 | 0.26 | 0.79 | 1/4 | 0.98 | 1.65 | 1.10 | 8.54 | – | 1.26 | – | 0.18 | 1.73 | 1.02 | 1.57 | – | – |
4 | V62 | 3.07 | – | 0.96 | 0.18 | 0.31 | 1.10 | 3/8 | 1.34 | 1.92 | 1.73 | 9.49 | – | 0.47 | 5.20 | 0.18 | 1.02 | 1.42 | 2.17 | – | – |