Commom Valve Configurations in Stock with Blank Valve Stations for Future Expansion
Custom Made to Order Configurations also Available
NEMA 4 (IP65) Rated Protection
Trun-to-Lock Manual Override
Din Rail or Panel Mount
Requires Air Filtration of 40 Micron or Better
Operates Under Air Pressure of up to 8 bar (116 psi)
Temperature Range of -5 to 50°C (23 to 122°F)
产品描述
The VM10 series Valve Islands have been
discontinued, we currently do not have a replacement product.
The VM10 Series valve islands are stocked in
common configurations and are available in
2- or 4-way directional control valves. These
valves are well suited for operation with
PLC’s with low power consumption. The VM10 valve islands
provide high flow for a compact valve bank,
0.44 Cv from the 4-way directional (5/2)
control valve. All valve islands share a
common supply and exhaust channel.
Electrical connections are made easy with
25 or 44 pin D-sub cable connections.
Made-to-order valve islands
are available which may include mixed valve
types, dual pressure supply, different or
multiple tubing connections, internal/
external piloting, or a pneumapole (quick
disconnect) base with bottom or side tubing
connections for panel mount or through
enclosure mounting applications.
The 2-way (2 x 3/2) style valve contains
two independent 2-way valves (3/2) per
valve slice. The 4-way (5/2) style valve is
known as a 4-way directional control valve,
for controlling double-acting pneumatic
cylinders. These valves banks are normally
closed, internally piloted solenoid valves
that share common ports.
SPECIFICATIONS Electrical: 24 Vdc, 0.6 W per solenoid
with LED indication, tolerance ±10%
Surge Suppression: Flywheel diode Electrical Communication: Negative
common, 25 or 44 pin D-sub connector Actuation Time: 14 miliseconds Medium: Compressed air, filtered,
lubricated or non-lubricated Port Sizes, PIF (Push-in-Fittings): Stock valves 1/4, available in
1/8, 5/32, and 1/4", 3, 4, and 6 mm Operating Temperature: -20 to 50°C
(-4 to 122°F) Operating Pressure: Internal pilot
3 to 8 bar (43.5 to 116 psig) external pilot 28” Hg to 116 psig Air Flow: 5/2 valves 430 l/min (Cv 0.44); 2 x 3/2 valves 350 l/min (Cv 0.36) Materials: Body and End Plates: Engineered PPA co-polymer
Valves: Aluminum with nitrile rubber seals Tubing Requirements: Polyurethane
(85-95D hardness) or nylon 11 or 12
A data sheet is available on our FTP site with additional information.
† 所有金额以RMB显示 注: Pre-configured valve stations include as standard a left hand feed, right side blocked 5/16 port end plate. Comes with optional DIN rail mount kit, and equipped with 2 X 3/2 double valve solenoids. Multipole sub-connector for easy connection and hookup are also standard. Two open stations for expansion flexibility are included on each island. Does NOT include a pneumapole base with valve stations. 订购示例: (1) OM-AIR-V11569-E03 25-pin D sub connector, 3m (10') long., ¥695.00
