Ramp and Soak Process Controllers Wall-Mount, Multi-Zone |
| CN1514 and CN1517 Series |
|
 |
|
|
Ramp and Soak Process Controllers Wall-Mount, Multi-Zone
 |
| Click for larger image. |
|
|
|
|
| • |
4- and 7-Zone Controller
|
| • |
On/Off, PID, Heat/Cool
|
| • |
7-Segment Ramp and Soak Profile
|
| • |
Independent Profile for Each Zone
|
| • |
Separate Control Settings for Each Zone
|
| • |
Manual Setpoint Entry for Each Zone
|
| • |
Indefinite Hold During Ramp
|
| • |
Thermocouples, RTDs, and Thermistors
|
| • |
4 to 20 mA, 0 to 10 Vdc, Millivolts
|
| • |
Scaling for Millivolts, Voltage, and Current
|
| • |
Easy to View from a Distance
|
| • |
Better Visibility Than Typical Panel-Mount Units
|
| • |
Protection from Dust and Moisture
|
| • |
Sealed Enclosure with Clear Plastic Front - DIN IP65 Protection
|
View related products - Temperature and Process Controllers and Power Switching Devices
|
| |
|
|
|
 |
Housed in a wall-mount, watertight
plastic enclosure, the CN1514 and
CN1517 Series are versatile,
multi-zone controllers. They feature
multiple control modes that are ideal
for a full range of applications, from
simple to complex processes.
Input type for each zone is selected
independently. Scaling and offset
allow current and voltage signals to
be converted and displayed in
engineering units. Temperature
from thermocouples, RTDs, and
thermistors can be displayed in
°C/°F. In addition, each zone has its
own ramp/soak profile, with up to
7 segments.
On/off, as well as PID control, is
offered for optimal process stability.
Processes that do not require tight
control through complex tuning of
PID parameters can be run under
simple on/off control. Each zone has
its own set of on/off and PID
parameters, and each zone can be
programmed for heating or cooling.
Setpoint deviation, positive as well
as negative, can be viewed.
Additional functions include
min/max reading for each zone,
indefinite program hold, automatic
scanning and displaying of different
zones, and 3 display modes
(setpoint only, process only, or both
setpoint and process). Power,
control, and process signal
connections are conveniently made
with Euro style plug-in connectors.
Each zone has a 3-digit-long
engineering label that can be
programmed to indicate the type of
process being controlled (e.g., °C or
°F for temperature, psi for pressure,
etc.). Every controller's run status is
indicated by LEDs. Channel display
time is also programmable.
|
|
|
|
|
|
† Price are shown in RMB.
Note: Comes with complete operator’s manual.
|
|
|
|
|
|
|
|
|
Part Number Builder |
|
|
|
|
|
|
|
|
Option Descriptions
|
|
(1)
|
Model Number
|
| |
Select
4 for Wall-mount 4-zone controller
7 for Wall-mount 7-zone controller
|
(2)
|
Input Code
|
| |
Select
TC for J K T E thermocouple 4 to 20 mA 0 to 10 Vdc
RT for 100 Omega RTD 4 to 20 mA 0 to 10 Vdc
TH for Thermistor 4 to 20 mA 0 to 10 Vdc
R for R thermocouple 4 to 20 mA 0 to10 Vdc
S for S thermocouple 4 to 20 mA 0 to10 Vdc
B for B thermocouple 4 to 20 mA 0 to10 Vdc
MV for 4 to 20 mA 0 to10 Vdc 100mV
|
(3)
|
Power Option
|
| |
Select
Nothing(leave field blank) for None
-1 for 240 Vac
-2 for 8 to 15 Vdc
|
|
NOTE: All combinations may not be valid, check spec sheet for valid part numbers.
|
| |
|
|
|
|
|
|
| |
|
Keywords:Ramp and Soak Process Controllers Wall-Mount, Multi-Zone
|
Back to top
|
|
|
