Accessibility  Skip navigation  Site Map  Help  Search field  View shopping cart  View shopping cart  Skip to Navigation
800-819-0559 (Landline) | 400-619-0559 (Cell)
Home >> Flow and Level Produ... >> Valves >> Proportional Valves >> FSV10 Series

Electronically Controlled Proportional Valves
FSV10 Series   
CE
 
Electronic proportioning solenoid valves
FSV10 Series:Electronically Controlled Proportional Valves
Click for larger image.
   
• Pulsewidth-Modulated Control Circuit
• Accepts 0 to 5 Vdc or 4 to 20 mA Setpoint Inputs
• Made of Corrosion- Resistant 316 and 416 SS/FKM

View related products - Valves

Click to scroll below to order See Specs PDF Manuals View a printer friendly page

The FSV10 Series electronic proportioning solenoid valves can control the flow of a wide variety of gases and liquids. The variablestroke electromagnetic valve is pulsed by the driver electronics, maintaining the correct magnetic flux level in the solenoid and holding flow at the level of the analog input setpoint signal. A TTL-level input allows the valve to be shut off regardless of analog setpoint signal.
The output power level of the driver electronics is jumper selectable for cooler, more efficient operation. The FSV10 Series requires 12 to 30 Vdc, supplied by the optional FSV-PW 110 Vac plug-in power supply or via the 9-pin D connector (included). These valves come with 8 inches of wire, which must be soldered to the 9-pin D connector.

SPECIFICATIONS
Turndown Ratio: 100:1
Response Time: 500 msec max
Fluid Temperature Range: -10 to 54°C (14 to 130°F)
Typical Valve Surface Temperature: 54°C (130°F) with 24 Vdc power input
Required Power Input (Not Included): 12 to 30 Vdc, 1 A @ 12 Vdc; 0.5 A @ 24 Vdc via 9-pin D connector or DC power jack
Connection: ¼" compression fittings
Setpoint Input Signal: 0 to 5 Vdc or 4 to 20 mA
Valve Dimensions: 87.6 H x 87.6 L x 25.4 mm W (3.45 x 3.25 x 1.00") including compression fittings
Driver Electronics: 7.62 W x 7.62 D x 25.4 mm H (3 x 3 x 1")
Materials in Fluid Contact: 316 and 416 SS, FKM O-rings
Maximum Pressure: 500 psig (3448 kPa)
Maximum Differential Pressure: 50 psid (345 kPa); 35 psid (241 kPa) for FSV15
Leak Integrity: 1 x 10-9 sccs; helium, individually tested
Ambient Temperature: 0 to 50°C (32 to 122°F)
CE Compliance: EMC Directive
89/336/EEC EN55011:1991; Group 1,
Class A EN50082-2:1995
Order on www.omegaengineering.cn and 5% will be discounted when you checkout.
  To Order (Specify Model Number)
All list prices are pre-VAT rate not including tax and shipping 		 
 Part Number   Availability   Price(RMB)   Description    Qty.
 FSV11 2 Weeks   ¥6,430.00    0.51(0.02) orifice size, 0.009 Cv, 3500 mL/min Air, 125 mL/min Water at Maximum Flow  
 FSV12 7 Weeks   ¥6,090.00    1.02 (0.04) orifice size, 0.033 Cv, 13,000 mL/min Air, 400 mL/min Water at Maximum Flow  
 FSV13 7 Weeks   ¥6,430.00    1.4 (0.055) orifice size, 0.055 Cv, 21,500 mL/min Air, 700 mL/min Water at Maximum Flow  
 FSV14 7 Weeks   ¥6,090.00    1.6 (0.063) orifice size, 0.068 Cv, 25,000 mL/min Air, 850 mL/min Water at Maximum Flow  
 FSV15 7 Weeks   ¥6,090.00    3.18 (0.125) orifice size, 0.24 Cv, 100,000 mL/min Air, 2873 mL/min Water at Maximum Flow  
 Accessory
 FSV-PW 6 Weeks   ¥780.00    110 Vac/24Vdc wall socket power supply with 1.7 m (5.5') cord  
† Price are shown in RMB.

 Note: Comes complete with operator’s manual, driver module and 9-pin D connector.

*Based on 10 psig (690 mbar) differential pressure.

For Oxygen Cleaning add suffix, "-O2" to the model number; add $125 to price.


  Ordering Example: (1) FSV11 Proportioning solenoid valve with valve driver module, 20 cm (8'') wires on the valve and a mating 9-pin D connector, ¥6,430.00

   
Keywords:proportional valve, solenoid valve, flow, air flow control valve, proportional valve, water flow control valve , displacement measurement industrial automation and controls signal conditioner circuit signal isolators

   Back to top Back to top