OMEGA’s panel jacks contain two female, collet-type, spring-loaded connectors that will accept any standard male thermocouple connector. The panel jacks are molded of high-impact, glass-filled nylon and are numbered and labeled as well as color-coded.
RJACL Mounting plate used with
type JP decorator styled, colorcoded
panel jacks adapts them for
mounting as single-circuit jack in
control panel or instrument case.
Simplifies mounting, and holds the
connector in place tightly. Covers
33.3 mm (1.31") diameter knock-out
hole. All adaptor plates are made of
0.76 mm (0.030") nickel-plated
steel. Price includes all screws and
mounting hardware.
† Price are shown in RMB.
Note: Comes complete with rugged securing clips and metal mounting hardware. K, T, J, E, R, S and B are ANSI designations. Note: Type U (uncompensated) connectors are used with Type B thermocouples (Platinum/6% Rhodium-Platinum/30% Rhodium). Ordering Example: (1) JP-T-F Female panel jack with type T calibration, ¥87.00
Part Number Builder
Option Descriptions
(1)
Calibration Type
Select -K for Type K Calibration -T for Type T Calibration -J for Type J Calibration -E for Type E Calibration -R/S for Type R/S Calibration -G for Type G Calibration -C for Type C Calibration -D for Type D Calibration -U for Type U Calibration
(2)
ROHS
Select Nothing(leave field blank) for Non-ROHS -ROHS for ROHS
NOTE: All combinations may not be valid, check spec sheet for valid part numbers.
