Please Note: This immersion heater
should be used with an approved
temperature control device to assure
safe operation. See Controller
Section for our selection of process
controllers
SPECIFICATIONS Wattage: 1 to 2 kW Power: 120 and 240 V, 1 phase Watt Density: 43 to 86 W/in2 Screw Plug: 1¼ NPT stainless steel
passivated screw plug Enclosures: E1 general purpose, NEMA 1
(IP00) rated, or type E2 moistureresistant/
explosion-resistant enclosure2.
kW
Volts
W/in2
No. Htg. Elem.
E1 General Purpose Enclosure1
E2 Moisture Resis/Explosion Resis.2
Dim. B cm (in)
Model No.
Wt.kg (lb)
Model No.
Wt.kg (lb)
1
120
43
2
15.5 (6 1/8)
MTS-110-3/*
0.9 (2)
MTS-110-3E2/*
2.3 (5)
1
240
43
2
15.5 (6 1/8)
MTS-110-3/*
0.9 (2)
MTS-110-3E2/*
2.3 (5)
1.2
120
53
2
15.5 (6 1/8)
MTS-112/*
0.9 (2)
MTS-112E2/*
2.3 (5)
1.2
240
53
2
15.5 (6 1/8)
MTS-112/*
0.9 (2)
MTS-112E2/*
2.3 (5)
1.5
120
65
2
15.5 (6 1/8)
MTS-115/*
0.9 (2)
MTS-115E2/*
2.3 (5)
1.5
240
65
2
15.5 (6 1/8)
MTS-115/*
0.9 (2)
MTS-115E2/*
2.3 (5)
2
120
86
2
15.5 (6 1/8)
MTS-120/*
0.9 (2)
MTS-120E2/*
2.3 (5)
2
240
86
2
15.5 (6 1/8)
MTS-120/*
0.9 (2)
MTS-120E2/*
2.3 (5)
* Designate voltage, i.e., "120" for 120 Vac or "240" for 240 Vac. 1 Heaters with general purpose enclosures are UL Listed and CSA certified. 2 Heaters with moisture-resistant/explosion-resistant enclosures are CSA NRTL/C certified and are not intended for use in hazardous areas.
