Heavy-Duty pH Sensor For Submersible Applications |
PHE-7352-15,PHE-7353-15 |
|
|
|
|
Heavy-Duty pH Sensor For Submersible Applications
|
Click for larger image. |
|
|
|
|
|
|
The PHE-7352-15 is a combination pH sensor designed for insertable use
in process and waste water applications where greater pipeline penetration
is required. The outer body material is PPS and has ¾ MNPT
front and rear facing threads with 57.1 mm (2¼")
insertion depth. The sensor features sealed double junction construction
which is highly resistant to electrode poisoning solutions, (typically those
with cyanide, ammonia, sulfide and heavy metals in appreciable concentrations).
The use of the non-fouling patented Porous PTFE liquid junction ensures a
steady presence of reference electrolyte. Coupled with the novel Plunger pH
glass electrode design, this sensor assures a low long maintenance
service life in most applications. Use of the high temperature version is
recommended where service temperatures continuously exceed 80°C (176°F).
Application
• Suitable for Severe Conditions
• Large Diameter Pipe Insertion
• Waste Water Pipeline Insertion
|
|
|
|
|
|
† Price are shown in RMB.
Note: Comes complete with electrode care instruction sheet and 4.6 m (15 ft) of cable.
For non-standard cable lengths, replace the suffix "-15" in the model number with required length in feet, add $2 per foot to price. (Additional cost of applies to entire length of cable.)
For HF/Fluoride Resistant electrode, add suffix "-HF" to model number, add 50 to price.
For high temperature reference cell, add suffix "HT" to model number, add $35 to price.
For solution ground, add suffix "SG" to model number, add $45 to price.
Ordering Example: (1) PHCN-37 pH Controller, ¥5,535.00, plus (1) PHE-7352-15 General purpose sensor, ¥1,745.00, ¥5,535.00 + 1,745.00 = $7,280.00
|
|
|
|
|
|
|
|
|
Part Number Builder |
|
|
|
|
|
|
Option Descriptions
|
(1)
|
Electrode
|
|
Select 52 for Heavy-duty submersible pH electrode 53 for Heavy-duty long length insertion pH electrode
(2)
|
Cable Length
|
|
Select 15 for 15 Feet 25 for 25 Feet 50 for 50 Feet
(3)
|
ATC Sensor
|
|
Select -PT100 for 100 OHM Platinum RTD -PT1K for 000 OHM Pt RTD
(4)
|
Additional Option
|
|
Select Nothing(leave field blank) for None -HT for High Temperature -HF for HF/Fluoride Resistant electrode
|
NOTE: All combinations may not be valid, check spec sheet for valid part numbers.
|
| | |
|
|
|
|
|
| |
Related Links -
Related Products
|
|
|
|
|
|
|