Discontinued - Pinless Moisture/Relative Humidity Meter With Infrared Thermometer |
| RH297 Series |
|
 |
|
|
|
|
|
|
|
| • |
Quick Indication of Moisture Content Without Surface Damage
|
| • |
Manual Storage Up to 20 Labeled Readings
|
| • |
Large Easy-To-Read Backlit Dual Display with Fast Analog Bargraph
|
| • |
Pinless Measurement Depth to 19 mm (0.75") Below the Surface
|
| • |
Dew Point, Vapor Pressure and Condensation Point Measurements
|
| • |
Pin-Type Probe Allows for Moisture Readings at Different Penetration Levels
|
| • |
Infrared Design to Measure Non-Contact Surface Temperature; 8:1 Distance to Spot Ratio with 0.95 Fixed Emissivity
|
| • |
Built-In Humidity/ Temperature Probe Measures Relative Humidity, Air Temperature Plus Grains Per Pound (GPP) and Dew Point (DP)
|
| • |
Programmable High/ Low Moisture/ Humidity Alarms
|
| • |
Ambient and Surface Vapor Pressure
|
| • |
Minimum/Maximum and Data Hold
|
| • |
Auto Power Off and Low Battery Indication
|
View related products - Relative Humidity Measurement Instruments
|
| |
|
|
|
 |
This product has been discontinued. For a possible replacement please see FLIRMR77
The RH297 pinless moisture
meter incorporates a built-in
infrared thermometer and 20 point
memory. Manually store/recall up
to 20 labeled readings and monitor
moisture in wood and other
building materials with no surface
damage with the pinless moisture
sensor. Remote pin-type probe is
also included which allows
for contact moisture readings
[0.9 m (3') cable length].
The RH297 has an easy-to-read,
large dual display with automatic
backlight feature and fast analog
bargraph. Measure relative
humidity and air temperature with
built-in probe plus non-contact
infrared temperature with built-in
infrared design. Simultaneously
displays moisture value of wood
or material being tested, air
temperature, infrared temperature,
or relative humidity. Advanced
functions provide grains per
pound, dew point, vapor pressure
calculations and programmable
high/low moisture/humidity alarms.
Features automatic calculation of
differential temperature (IR-DP)
to determine condensation point.
The RH297 meter is shipped fully
tested and calibrated, and with
proper use, will provide years of
reliable service.
Specifications
Display: 3-digit primary display, 4-digit secondary display
Vapor Pressure: 0 to 20.0kPA, calculated from temperature and RH measurements
Dew Point: -30 to 100°C (-22 to 199°F)
Mixing Ratio: 0 to 999 GPP (0 to 160g/kg)
Sample Rate: 2 per second
Backlight: White LED
Memory: 20 point memory
Bluetooth Range: Approximately 10 m (32')
Operating Temperature: 4 to 43°C (40 to 110°F)
Storage Temperature: -30 to 60°C (-14 to 140°F)
Operating Humidity: 90%, 0 to 30°C (32 to 86°F), 75%, 30 to 40°C (86 to 104°F), 45%, 104 to 122°F (40 to 50°C)
Storage Humidity: 90%
Power Supply: 9V battery (included)
Battery Life: 6 to 8 weeks (4 hours/day use), using alkaline batteries
Auto Power Off (APO): After 30 minutes (nominal) inactivity; APO function can be disabled by the user
APO Quiescent Current: 50 µA maximum
Dimensions: 165 x 70 x 38 mm (6.5 x 2.8 x 1.5")
Weight: 210 g (7.4 oz)
|
|
|
|
|
|
† Price are shown in RMB.
Note: Comes complete with pin moisture probe with 0.9 m (3') cable, 9V battery, soft pouch case, and operator’s manual.
|
|
|
|
|
| |
|
Keywords:Pinless Moisture/Relative Humidity Meter With Infrared Thermometer, temp humidity sensors
|
Back to top
|
|
|
