Retractable Sensor Cables for Thermocouples, RTDs and Thermistors |
| RSC and RSCM Series |
|
 |
|
|
|
|
|
¥
108.00
RSC-RTD-1-0-0
|
| • |
J, K, T and E Thermocouple Calibrations and 3-Wire Copper for RTD’s and Thermistors
|
| • |
Expansion Ratio up to 500%—1 Foot of Cable Stretches to 5 Feet
|
| • |
TPE Plastic Jacket for Indoor and Outdoor Use to 220°F (104°C)
|
| • |
Retracted Coil Lengths of 1, 2, 3 and 4 Feet with 6" Straight Ends
|
| • |
Ideal for Use with Handheld and Benchstand Electronic Indicators
|
View related products - Wire: Thermocouple, RTD, Thermistor and Hook-Up
|
| |
|
|
|
 |
OMEGA™ Retractable Sensor Cable is color coded and spring coiled, for use with thermocouples, RTD’s and thermistors.
To achieve a superior jacket construction, OMEGA has employed the latest in jacketing material: TPE (thermoplastic elastomer), a unique family of thermoplastics which exhibits characteristics previously found only in rubber compounds. TPE is extremely tough and flexible, and has excellent abrasion resistance. Our special construction technique yields an expansion rate of up to 500%.
OMEGA’s retractable sensor cables are specifically recommended for use with electronic-type indicators, either panel, handheld or bench type models. The cables should not be used with self powered, unamplified analog meters, such as OMEGA™ Series 7000 pyrometers. Retractable sensor cables have hundreds of applications: oscillating machinery, handheld surface probes, or wherever retractable sensor cables are required.
Color Code of Cables
| ANSI Code |
Calibration |
Jacket |
+Wire |
–Wire |
| J | Iron/Constantan | Black | White | Red |
| K | CHROMEGA™/ALOMEGA™ | Yellow | Yellow | Red |
| T | Copper/Constantan | Blue | Blue | Red |
| E | CHROMEGA™/Constantan | Purple | Purple | Red |
| RTD/TH | Copper (3-Wire) | White | 2 Black | Red |
Typical Resistance of Cables
Ohms Per Running Foot of Cable
30 cm (1 ft) Coiled (150 cm [5 ft] Extended) |
Ohms Per Foot of Wire
Three Wires Per Cable) |
| J | K | T | E | RTD and Thermistor |
| 16.3 | 27.5 | 14 | 33.1 | 0.57 |
| Model No. |
Input
Type |
O.D.
mm (in) |
| RSC-(1)-(2)-(3)-(4) | T/C | 4.2 mm (0.165") |
| RSC-RTD-(2)-(3)-(4) | RTD | 4.4 mm (0.175") |
| RSC-TH-(2)-(3)-(4) | TH | 4.24 mm (0.175") |
| RSCM*-(1)-(2)-(3)-(4) | T/C | 3.4 mm (0.135") |
How To Order
1. Fill the 1st box (1) with desired ANSI Calibration. Use ANSI symbols
“J”, “K”, “T”, “E” for thermocouple calibration; “RTD” for resistance
temperature detector; or “TH” for thermistor.
2. Fill in 2nd box (2) with retracted coil length in cm (ft): 30 (1), 60 (2),
90 (3) or 120 (4).
3. Fill in 3rd box (3) with termination style number (one end).
4. Fill in 4th box (4) with termination style number (other end).
* M = Miniature Retractable Cable
† Indicate associated meter or pin out desired for connector
|
|
|
|
|
|
† Price are shown in RMB.
Ordering Example: (1) RSC-K-2-1-1 2 foot long, Type K retractable sensor cable with spade lugs on one end and a trimmed ends standard connector on the other, ¥273.00
|
|
|
|
|
|
|
|
|
Part Number Builder |
|
|
|
|
|
|
|
|
Option Descriptions
|
|
(1)
|
Cable Type
|
| |
Select
RSC for Retractable sensor cable
RSCM for Miniature retractable sensor cable
|
(2)
|
Input Type
|
| |
Select
J for Type J thermocouple
K for Type K thermocouple
T for Type T thermocouple
E for Type E thermocouple
RTD for Resistance temperature dector
TH for Thermistor
|
(3)
|
Retracted Length
|
| |
Select
1 for 1 ft.
2 for 2 ft.
3 for 3 ft.
4 for 4 ft.
|
(4)
|
Termination Style (End #1)
|
| |
Select
0 for Trimmed Ends(standard)
1 for Spade Lugs
2 for OST-M(Male)
3 for OST-F(Female)
4 for SMP-M(Male)
5 for SMP-F(Female)
6 for OTP-F(Female-Thermistor and RTD only)
7 for OTP-M(Male-Thermistor and RTD only)
8 for TA3-FL(Female-Thermistor and RTD only)
9 for TA3-ML(Male-Thermistor and RTD only)
10 for MTP-F(Female-Thermistor and RTD only)
11 for MTP-M(Male-Thermistor and RTD only)
|
(5)
|
Termination Style (End #2)
|
| |
Select
0 for Trimmed Ends(standard)
1 for Spade Lugs
2 for OST-M(Male)
3 for OST-F(Female)
4 for SMP-M(Male)
5 for SMP-F(Female)
6 for OTP-F(Female-Thermistor and RTD only)
7 for OTP-M(Male-Thermistor and RTD only)
8 for TA3-FL(Female-Thermistor and RTD only)
9 for TA3-ML(Male-Thermistor and RTD only)
10 for MTP-F(Female-Thermistor and RTD only)
11 for MTP-M(Male-Thermistor and RTD only)
|
|
NOTE: All combinations may not be valid, check spec sheet for valid part numbers.
|
| | | |
|
|
|
|
|
|
| |
|
Back to top
|
|
|
