Deep Tank/Sump Immersion Heaters |
| TAT6 |
|
 |
|
|
|
|
|
|
|
| • |
12 mm (0.475") Diameter Incoloy® Elements and Stainless Steel Wetted Parts Standard
|
| • |
Designed for Permanent Installation in Outdoor/ Indoor Applications
|
| • |
0.61 to 3.6 m (2 to 12') Vertical Riser Height (for Thermostat Designs)
|
| • |
Weathertight Mounting Hardware Supplied
|
| • |
Riser Adjustable to Facilitate Mounting Variations
|
| • |
Nema 4 Electrical Enclosure with 3/4" Conduit Fitting
|
| • |
38 mm (1 1/2") Sludge Legs
|
| • |
Double-Pole 16 to 121ºC (60 to 250°F) Pilot Duty Thermostat
|
| • |
Watertight Thermowell Sized for 9.5 mm (3/8") Maximum Diagram Sensing Bulb
|
| • |
120V, 208V, 277V, and 575V Versions Available (Contact Omega)
|
View related products - Immersion Heaters
|
| |
|
|
|
 |
Application
These fluid immersion heaters are designed for top mounting
in large or deep enclosed tanks having a manhole access
or opening suitable to insert and attach the heater. They
are usable for either outdoor or indoor applications, within
exposed or in-ground tanks and sewerage sumps. They
are designed for permanent mounting and can be sealed
weathertight with supplied gaskets and adjustable
riser fittings.
NEMA 4 terminal housing is easily removable and resealed
to facilitate installation. Units are available with element
watt densities from 6 watt/in² for heavy oils, to 60 watt/in²
for clean water immersion applications. Element bundle
diameters ranging from minimum of 254 mm (10") OD
to a maximum of 762 mm (30") OD are available.
Construction
The tubular elements are welded into a submersible
liquid-tight stainless steel junction box. Element power leads
are routed up through adjustable riser pipe and connected to
a terminal block inside the upper NEMA 4 terminal housing.
Unless specified otherwise, heaters are factory wired for
three phase and are easily converted to single phase.
All wetted parts parts are 300 series stainless steel.
Standard unit includes 15.5 to 121ºC (60 to 250°F)
double-pole thermostat mounted in upper housing that
has a 9.5 mm (3/8") diameter bulb and capillary installed in
watertight thermowell with adjustable compression fitting.
| Model No. |
KW |
Number of Elements |
mm (inch) |
| 240V-1Ph |
240V-3Ph |
480V-1Ph |
480V-3Ph |
A |
B |
E |
| TAT60001 |
TAT60002 |
TAT60003 |
TAT60004 |
5 |
3 |
1829 (72) |
387 (15.25) |
190 (7.5) |
| TAT60005 |
TAT60006 |
TAT60007 |
TAT60008 |
7.5 |
6 |
266 (10.5) |
| TAT60009 |
TAT60010 |
TAT60011 |
TAT60012 |
10 |
9 |
343 (13.5) |
| — |
TAT60013 |
TAT60014 |
TAT60015 |
15 |
12 |
419 (16.5) |
| — |
TAT60016 |
TAT60017 |
TAT60018 |
20 |
18 |
571 (22.5) |
| — |
— |
TAT60019 |
TAT60020 |
30 |
24 |
724 (28.5) |
|
Ordering Example: TAT60001, 5 KW immersion heater, 240 Vac, 1 phase.
|
|
|
|
|
|
|
† Price are shown in RMB.
Ordering Example: (1) TAT60001 5 KW immersion heater, 240 Vac, 1 phase., ¥35,260.00
|
|
|
|
|
| |
|
Related Links -
Related Products
|
|
|
|
Related Products
|
 |
TAT1_TAT2:
|
|
Tank Immersion Heaters Over-the-Side Immersion Heaters
|
|
|
|
|
|
 |
TAT3:
|
|
Drum Immersion Heaters for High Viscosity Solutions and Adjustable Stainless Steel Mounting Bracket
|
|
|
|
|
|
 |
TAT400:
|
|
Tank Immersion Heaters General Purpose Tank or Reservoir Water
|
|
|
|
|
|
|
|
|
|
|
