Circulation Heaters for Heat Transfer Oils, Liquid Paraffin, Degreasing Solutions and Light/Medium Weight Oils |
| CHF3 Series |
|
 |
|
|
|
|
|
|
|
| • |
Standard Element Sheath Materials
|
| • |
Incoloy® 800 — A Nickel (30 to 35%), Chromium (19 to 23%), Iron alloy. The high nickel content of this alloy contributes to its resistance to scaling and corrosion. Used in air heating (also see Incoloy® 840) and immersion heating of potable water and other liquids that are not corrosive to an Incoloy® 800 sheath.
|
| • |
Low Carbon Steel — Applications include fluid heat transfer media, tar, high to low viscosity petroleum oils, asphalt, wax, molten salt, and other solutions not corrosive to a steel sheath.
|
| • |
316 Stainless Steel — A Chromium (16 to 18%), Nickel (11 to 14%), Iron Alloy with Molybdenum (2 to 3%) added to improve corrosion resistance in certain environments, especially those that would tend to cause pitting due to the presence of chlorides. Applications include deionized water.
|
| • |
Copper — Mainly used in clean water heating for washrooms, showers, rinse tanks and freeze protection of storage tanks.
|
View related products - Circulation Heaters
|
| |
|
|
|
 |
Surface Treatments for Stainless Steel and Incoloy® Elements and Other Wetted Parts to Improve Corrosion Resistance
Flanged immersion heater surfaces in contact with the material being heated can be passivated or electro-polished to improve
their resistance to corrosion.
Passivation removes surface contamination, usually iron, so that the optimum corrosion resistance of the stainless steel
is maintained. Surface contamination would come from the small amount of steel that may be worn off a tool during the
manufacturing process. Passivating is accomplished by dipping the heater in a warm solution of nitric acid.
Electro-Polishing is an electrochemical process that removes surface imperfections and contaminants, enhancing the corrosion
resisting ability of the stainless steels. The resultant surface is clean, smooth and bright. Many medical and food applications
require this finish.
8 watts/in2 (1.3 watts/cm2) — Typical Applications: Fuel Oils (Bunker C and Number 6)
Note: 3-Phase only. Cannot be rewired for single phase.
|
| Nominal Pipe Size |
Dimensional Drawing Number |
KW |
Model Number |
Approx Weight |
| 120V |
240V-1Ph (C*) |
240V-3Ph (C*) |
480V-1Ph (C*) |
480V-3Ph (C*) |
lb |
kg |
| 21⁄2 NPT 3 elements |
2.2 |
2 |
— |
— |
CHF01100(1) |
— |
CHF01101(1) |
37 |
17 |
| 2.3 |
3 |
— |
— |
CHF01102(1) |
— |
CHF01101(1) |
46 |
21 |
| 3"—150 lb 3 elements |
3.2 |
2 |
— |
— |
CHF01104(1) |
— |
CHF01105(1) |
62 |
28 |
| 3.3 |
3 |
— |
— |
CHF01106(1) |
— |
CHF01107(1) |
76 |
34 |
| (C*) = Number of Branch Circuits per heater |
|
23 watts/in2 (3.6 watts/cm2)—Typical Applications: Lightweight Oils, Degreasing Solutions, Heat Transfer Oils
|
| Nominal Pipe Size |
Model No. |
Dimensional Drawing Number |
KW |
Approximate Weight |
| 480V-3Ph (C*) |
lb |
kg |
| 10"—150 lb 27 elements |
CHF01384(3) |
10.3 |
90 |
537 |
244 |
| CHF01385(3) |
10.4 |
105 |
580 |
263 |
| CHF01386(3) |
10.5 |
120 |
623 |
283 |
| 12"—150 lb 36 elements |
CHF01387(4) |
12.4 |
140 |
751 |
341 |
| CHF01388(4) |
12.5 |
160 |
793 |
360 |
| 14"—150 lb 45 elements |
CHF01389(5) |
14.3 |
150 |
824 |
374 |
| CHF01390(5) |
14.4 |
175 |
885 |
401 |
| CHF01391(5) |
14.5 |
200 |
941 |
427 |
Ordering Example: CHF01386, 120 KW, 480 Vac, 3 phase circulation heater.
(C*) = Number of Branch Circuits per heater
Note: Nominal pipe size 203 mm (8") and larger are 20 watts/in2 (3.1 watts/cm2)
|
16 watts/in2 (2.5 watts/cm2)—Typical Applications: Medium Weight Oils, Heat Transfer Oils, Liquid Paraffin.
Note: 3-Phase only. Cannot be rewired for single phase.
|
| Nominal Pipe Size |
Model No. |
Dimensional Drawing Number |
KW |
Approximate Weight |
| 240V-3Ph (C*) |
480V-3Ph (C*) |
lb |
kg |
| 21⁄2 NPT 3 elements |
CHF01392(1) |
CHF01393(1) |
2.1 |
2 |
28 |
13 |
| CHF01394(1) |
CHF01395(1) |
2.1 |
2.5 |
29 |
13 |
| CHF01396(1) |
CHF01397(1) |
2.1 |
3 |
30 |
14 |
| CHF01398(1) |
CHF01399(1) |
2.2 |
4 |
37 |
17 |
| CHF01400(1) |
CHF01401(1) |
2.3 |
5 |
45 |
20 |
| CHF01402(1) |
CHF01403(1) |
2.3 |
6 |
46 |
21 |
| 3”—150 lb 3 elements |
CHF01404(1) |
CHF01405(1) |
3.1 |
2 |
53 |
24 |
| CHF01406(1) |
CHF01407(1) |
3.1 |
2.5 |
53 |
24 |
| CHF01408(1) |
CHF01409(1) |
3.2 |
3 |
61 |
28 |
| CHF01410(1) |
CHF01411(1) |
3.2 |
4 |
62 |
28 |
| CHF01412(1) |
CHF01413(1) |
3.3 |
5 |
74 |
34 |
| CHF01414(1) |
CHF01415(1) |
3.3 |
6 |
76 |
34 |
Ordering Example: CHF01396, 3 KW, 240 Vac, 3 phase circulation heater.
(C*) = Number of Branch Circuits per heater
|
|
|
|
|
|
|
† Price are shown in RMB.
Note: (C*) = Number of Branch Circuits per heater. Note: Nominal pipe size 203 mm (8") and larger are 20 watts/in2 (3.1 watts/cm2)
Ordering Example: (1) CHF01392 240V-3Ph, 2 KW, 28 lbs Nominal Pipe Size; 2 1/2 NPT 3 elements, ¥24,875.00
|
|
|
|
|
| |
|
Related Links -
Related Products
|
|
|
|
Related Products
|
|
|
 |
CHF2 Series:
|
|
Circulation Heaters for Lightweight Oils, Degreasing Solutions, Heat Transfer Oils
|
|
|
|
|
|
 |
CHF3 Series:
|
|
Circulation Heaters for Heat Transfer Oils, Liquid Paraffin, Degreasing Solutions and Light/Medium Weight Oils
|
|
|
|
|
|
 |
CHF4 Series:
|
|
Circulation Heaters for Medium Weight Oils, Heat Transfer Oils, Liquid Paraffin
|
|
|
|
|
|
 |
CHF5 Series:
|
|
Circulation Heaters for Forced Air & Gases, Caustic Solutions, Degreasing Solutions
|
|
|
|
|
|
|
|
|
|
 |
CHF8 Series:
|
|
Circulation Heaters for Deionized Water, Demineralized Water
|
|
|
|
|
|
 |
CHF9 Series:
|
|
Circulation Heaters for Clean Water, Aqueous Solutions
|
|
|
|
|
|
|
|
|
|
|
