Paddlewheel Flow & Temperature Sensor/Transmitter |
| FP7002 Series |
|
 |
|
|
Paddlewheel Flow & Temperature Sensor/Transmitter
 |
| Click for larger image. |
|
|
|
|
|
|
 |
The FP7002 Series Paddlewheel Flow sensor/transmitter flow system provides a low cost, factory
calibrated, simple, and easy to install solution for applications requiring a remote long distance flow
and temperature sensor located away from the main indicating meter or controlinstrumentation. When
ordered with an FP7000 series installation fitting, the sensor/transmitter is factory calibrated to match the
flow rate of the fitting selected. Example: if you ordered an FP7002 sensor/transmitter with an FP7010
PVC fitting, the analog output of the transmitter will be factory calibrated to give 20 mA output at the
max flow rate of 50 GPM and 4 mA out at 0 GPM. The analog output can be converted to 1 to 5 Vdc output
in the field without recalibrating the system. Also now included into the FP7002 design at no extra
charge is an independent temperature sensor/transmitter with an industry standard 2-wire, 4 to 20 mA
loop output scaled over a 0 to 100°C temperature range.
SPECIFICATIONS
Paddlewheel Output
Accuracy: ±2% FS
Repeatability: ±1% FS
Power: 12 to 18 Vdc @ 50 mA max
Output: 3-wire, 4 to 20 mA (1 to 5 Vdc with external 250 Ω resistor)
Max Loop Resistance: &Omega = (Vsupply–12 V)/0.02 A
Wetted Materials:
Sensor Body: Polypropylene
O-Ring: FKM
Paddle: PVDF
Locking Nut:
FP7002: PVC
FP7002A: Brass
Fluid Temperature/Pressure Range: Do not exceed maximum ratings of the piping. Depending on the
material of the fitting, the operating temperature/pressure may be limited by the piping and not by
the sensor. For all PVC tee fittings, do not exceed 150 psig @ 27°C (80°F), 100 psig @ 38°C
(100°F), 60 psig @ 49°C (120°F) or 30 psig @ 60°C (140°F), owing to the insert in
the tee. FP7000 sensor: 0 to 26°C (32 to 80°F) up to 150 psig; max pressure decreases 1.1 psig
per each 0.56°C (1°F) above 27°C (80°F) for a max temperature of 93°C (200°F)
at 18 psig max
Weight:
FP7002: 0.3 kg (0.75 lb)
FP7002A: 0.4 kg (1 lb)
Max Viscosity: 5 cps
Temperature Output
Temperature Range: 0 to 100°C (32 to 212°F)
Accuracy: ±1.7°C (3.1°F)
Power: 12 to 18 Vdc @ 30 mA
Output: 2-wire, 4 to 20 mA (1 to 5 Vdc with external 250 Ω resistor)
Max Loop Resistance: Ω = (Vsupply – 12 V)/0.02 A
|
|
|
|
|
|
† Price are shown in RMB.
Note: Comes with complete operator's manual.
Ordering Example: (1) CNI833 1/8 DIN Controller, ¥4,055.00, plus (1) SYS/FP7002/FP7010 Transmitter system with 1, ¥6,765.00, plus (1) TX4-100 4 Conductor shielded cable, 100 feet, ¥555.00, ¥4,055.00 + 6,765.00 + 555.00 = $11,375.00
|
|
|
|
|
| |
|
Related Links -
Related Products
|
|
|
|
Related Products
|
 |
Sensor Wire:
|
|
Sensor and Transducer Wire and Multi-Conductor Cable
|
|
|
|
|
|
 |
DP24-E:
|
|
1/8 DIN Economical Process Meter - Discontinued
|
|
|
|
|
|
 |
DP25 Series:
|
|
Temperature, Process, Strain, pH or ORP Meters with Optional Relays, Analog Outputs and Display Options - Discontinued
|
|
|
|
|
|
 |
CNi8 Series:
|
|
i-Series 1/8 DIN Temperature, Process
and Strain PID Controllers
|
|
|
|
|
|
 |
DPi32, DPi16, DPi8 Series:
|
|
i-Series 1/32, 1/16, 1/8 DIN Programmable Temperature/Process Meters with RS232 & RS485 Communications
|
|
|
|
|
|
 |
CL535:
|
|
CL535 - Discontinued
|
|
|
|
|
|
|
|
|
|
|
